Add some room for switches and electrical accessories in an ergonomically safe and accessible location around the perimeter of the stock instrument panel. Constructed of 16 gauge steel powder coated a nice satin black.
ABS Models, please note: You will have to relocate your ABS switch. Details in video at the bottom of this page.
To install, you'll need to remove the instrument panel. This is fairly easy. It takes about half an hour with common hand tools. We recommend watching our LED turn signal video as it clearly shows how to remove the windscreen, the headlight assembly and then you have easy access the 3 screws that hold the instrument panel in place as well as the wiring harness connector. With the panel removed, position the Rally Dash into place end then simply re-install the panel, headlight and windscreen and you are ready to wire up some switches and install your favorite electrical accessories!
ABS models will require you to relocate the ABS switch bracket.
The upper outlet port diameter is 1-1/8"
The lower switch ports are 1/2" diameter openings.
Note: The installed photo shows the product with the switches/chargers, these are not included with this Bare Dash Panel product.
Also available: Panel with water-resistant switches, 12-volt socket and Dual USB Charger See product on our site
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Crash Bar Set KTM 390 Adventure 2020-2023
KTM390-17-01-OR
Regular price
$477.00
Sale price
$355.75
Save $121.25
Crash bars provide full protection of lower engine/body/chassis
Manufactured out of Steel tubing of 1” diameter and 1.8 mm thickness, laser cut and bent on CNC machines
TIG welded and shot blasted to remove all residual stresses, before surface protection process
Corrosion resistant powder coating in ready to race orange or classic black finish
Assembly includes hardware, brackets, and replaceable guards made of compression molded resin to take impact
*Note: SRC MOTO is located in Oregon which is one US state that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Frame Guard (LEFT) - Yamaha Ténéré 700
Y-T700-20-02
Regular price
Sale price
$48.00
Save $-48.00
SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2023
Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel.
Crafted out of 2 mm thick aircraft fuselage grade stainless steel
Laser-cut, CNC bent on state-of-the-art machines
Easy 5-minute install using the stock fasteners and common hand tools
Available in natural silver stainless finish or black powder-coated
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Cargo Tail Rack - Yamaha Ténéré 700 V2
Y-T7-V2-04-02
Regular price
$276.00
Save $-276.00
SRC Designs Cargo Tail Rack for Yamaha Ténéré 700
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for passenger to sit. The full version of the V1 top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics. This new rear rack (V2) with grab rails is great as it allows access to air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Pre-drilled for our 3L fuel can mount
Available in Satin Black powder coat
Fitment:
Yamaha Ténéré 700 years 2020 - 2024*
Black powder-coated aluminium
Laser cut 3.25mm aluminium plate
Light but super strong - only 1.3kg
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above the passenger seat (standard OEM seat)
Slotted all round to cater for plenty tie-down points
Pre-drilled to fit SRC 3 litre plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
Quick & easy fitment
Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts)
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
ADV 150
Rear Cargo Tail Rack HONDA ADV150
H-ADV150-V2-04-02
Regular price
$218.00
Save $-218.00
Fits 2019-2023 HONDA ADV150
Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your ADV150!
This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe. You can safely carry up to 35 lbs (16 Kg's) with this rack system.
Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long.
No drilling or modifications required, easily mounts in under an hour with common hand tools.
Installation video
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Does not fit 2022-2023 or models equipped with E5 catalytic converter
Protect your Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed stainless steel or satin black powder-coat
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side Rack Upgrade Set 2015-2024 CRF 300L & Rally models
H-CRF300-04-02-SET-UG-1
Regular price
$225.00
Save $-225.00
If you already have the SRC Tail rack (not compatible with other racks) you can upgrade at any time to the full system* with this easy to bolt-on kit. Works with both SRC steel and aluminum tail rack versions.
Kit contains a left and right pannier rack, rear cross brace, and attachment hardware. (the items in the red square boxes in the first image)
NOTE: We recommend using blue thread locker on the fasteners.
*Complete rack or gas can is not included in this side rack upgrade. They are shown for reference only and available in the Racks and Luggage section of our website.
Fits 2015-2024 CRF 300L & Rally models
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Cargo Tail Rack - Yamaha Ténéré 700 V1
Y-T700-04-01
Regular price
$184.00
Save $-184.00
SRC Designs Cargo Tail Rack for Yamaha Ténéré 700 2021-2024 Version 1 (V1)
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Black powder coated aluminium
Laser cut 3.25mm aluminium plate
Light but super strong - only 1.3kg
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above passenger seat (standard OEM seat)
Slotted all round to cater for plenty tie down points
Pre drilled to fit SRC 3 litre plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
Quick & easy fitment
Please note this rack will not fit with the rally seat
Fuel tanks & fuel tank mounting brackets as seen in some of the photos are not included in price (sold as separate parts)
The top rack is good for small luggage set up and especially Kriega luggage, however if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the rack fits over the passenger seat so no place for a passenger to sit. The top rack with side racks is good for riders that have soft luggage and side racks are slightly raised off the side with rubber stands-offs so they stop potential damage caused by luggage rubbing on the plastics. The new rear rack V2 with grab rails (available here) is great as it allows access to air filter & electrics etc. without the need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at the rear of the bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of the bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
NOTE: These also fit the Honda CRF 300L Rally model as well, however you will need to remove the stock plastic skid plate and lower body work
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Rack BMW G 310 GS
BMW-310GS-04-02-AL
Regular price
$162.00
Save $-162.00
TOP CASE RACK FOR BMW G310 GS 2017-2024
SRC DESIGN Cargo Racks* are made of lightweight strong 3mm aluminum alloy plate for an optimal balance of strength to weight. CAD designed and manufactured for a sleek and precise fit to match the rear profile of your bike and provide generous surface footprint with an abundance of attachment points for hooks, straps, and packs.
Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation.
Please note: Accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Case shown in the images is not included with this product but is available as well. If this is needed, please see this add-on product on our site: "Quick-release mounts"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Crash Bar Set KAWASAKI VERSYS 1000 - 2019-2022 CLOSEOUT
K-VS1000-19-17-01-SL
Regular price
$648.00
Save $-648.00
Crash Bar Set KAWASAKI VERSYS 1000 - 2019 to 2022
Black has sold out and is no longer available.
Available Electropolished 304Stainless Steel silver or Satin Black Powder Coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Full Rack System+Gas Can for the CRF HONDA 250L & Rally
H-CRF250L-04-03
Regular price
$438.00
Save $-438.00
SRC Designs Full Rack System with Gas Can for the 2013-2020CRF HONDA 250L & Rally
This is the Adventure Rack System you want!
Innovative modular design made of high-strength lightweight aluminum alloy. (Entire rack only weighs 4.8 lbs! )
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System + Gas Can features:
Top rack surface is 14" long and 10" wide at the front, tapering rearward to 8-1/2" The side racks increase the top surface width to 16" wide
Side rack surface is APPROXIMATELY 8" wide and 10" tall
High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX)
Rear Cross Brace for increased rigidity in event of the inevitable tip over.
Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
Center tail rack is nicely sized and shaped to fit the rear of the 2013-2020 250L & 2017-2020 Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).
Racks are powder-coated satin black for a long-lasting durable finish that looks great on the 250L and Rally!
Gas Can is a rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack. Includes quick-release mount and hardware that easily attaches to the inside of the left SRC pannier rack, which is pre-drilled for this mount.
Not compatible with Yoshimura exhaust due to the side outlet design of the Yoshimura system
Please Note: The CRF 250L/Rallyspecifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Rack 2015-2019 KAWASAKI VERSYS 650
K-VS18-04-02
Regular price
$172.00
Save $-172.00
Rear Cargo Rack 2015-2019 KAWASAKI VERSYS 650
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight and lots of openings for bungee cords and strapping.
The unique SRC 2 part design incorporates a stainless steel subframe base extension (shown raw in this image, but is black with the black rack and silver with the silver racks) and a 3mm thick aluminum main base platform for increased durability and load capacity of 22 lbs / 10 Kg.
Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation
NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is NOT included and is no longer available.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Headlight Guard Ducati Desert X
D-DSX-01-02
Regular price
$168.00
Save $0.00
YourDesert X comes with beautiful headlights that put out a decent swath of light! Protect them from road debris impact damage with the SRC Designs Headlamp guard kit.
Fits: Ducati Desert X 2022 - 2023
Available in your choice of satin black powder coat or natural brushed stainless steel finish.
The SRC headlight guard provides a proper defense against rocks, limbs and other debris you might encounter on your adventures!
All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools!
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protective Aluminum Skid Plate/Lower Engine Sump Guard - Yamaha Ténéré 700 V1 standard version
Y-T7-V1-09-01-AL
Regular price
Sale price
$368.00
Save $-368.00
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow. Standard protection version. We also offer an upgraded V2 version with left and right wing extensions that provide added protection for the waterpump and hoses on the right side and the ignition cover on the left side. It's available here on the website.
Fits Yamaha Ténéré 700 years 2022-2024 (and all Euro 5 exhaust models)
This skid plate is compatible with SRC lower crash bars.
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed aluminum steel or satin black powder-coat aluminum
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Headlight Guard HONDA CRF 450RL 2019-2022
H-CRF450RL-01-02
Regular price
$102.00
Sale price
$55.75
Save $46.25
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Crash Bar Set SUZUKI V-STROM 1000 2017-2020
S-VS1000-17-17-01-SL
Regular price
$602.00
Save $-602.00
Crash Bar Set SUZUKI V-STROM 1000 2017-2020
Available electropolished 304 stainless steel silver or satin black powder coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Full Rack System for the CRF HONDA 250L & RALLY
H-CRF250L-04-02
Regular price
$344.00
Save $-344.00
SRC Designs Full Rack System for the 2013-2020 CRF HONDA 250L & Rally 250L The SRC Rack is designed to allow access to the toolbox under the left side panel as can be seen in the images below. Also available with 1 gal / 3L fuel can and mount
This is the Adventure Rack System you want!
Innovative modular design made of high-strength lightweight aluminum alloy. (Entire rack only weighs 4.8 lbs! )
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System features:
Top rack surface is 14" long and 10" wide at the front, tapering rearward to 8-1/2" The side racks increase the top surface width to 16" wide
Side rack surface is APPROXIMATELY 8" wide and 10" tall
High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX) Although a ROTOPAX can be installed on the exterior sides., just not on the interior as shown as the ROTPAX is too wide.
Rear Cross Brace for increased rigidity in event of the inevitable tip over.
Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
The SRC Rack is designed to allow access to the tool box under the left side panel as can be seen in the images below.
Center Tail Rack is nicely sized and shaped to fit the rear of the 2013-2020 250L & 2017-2020
Rally and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack (weighs just over a pound) mounts to the stock steel subframe points (where the stock strap bolts are located).
Not compatible with Yoshimura exhaust due to the Yoshimura side outlet tip.
Powder-coated satin black for a long-lasting durable finish that looks great on the 250L!
Available add-ons include (See our site):
MOTO STUFF Fuel can
Please Note: The CRF 250L/Rallyspecifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow and this V2 version offers left and right wing extensions compared to our standard model. The wings are visible in the photos and provide extra protection for the left side ignition cover and the right side water pipe and hoses.
PLEASE NOTE! This skid plate is not compatible with most lower crash bars, including SRC lower crash bars. That being said, the wing extensions do a good job of protecting the lower portions of the engine though.
Fits Yamaha Ténéré 700 years 2022-2024 and all Euro 5 exhaust models
Protect your T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for the removal of skid plate
Available in natural brushed aluminum or Satin black powder coat made of a burly 4mm thick aluminum alloy.
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Tail Rack HONDA ADV160
H-ADV160-V2-04-02
Regular price
$180.00
Save $-180.00
Fits 2022-2024 HONDA ADV160
Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your ADV160!
This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe. You can safely carry up to 35 lbs (16 Kg's) with this rack system.
Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long.
No drilling or modifications required, easily mounts in under an hour with common hand tools.
Installation video
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
ADV 150
Cargo Tail Rack Ducati Desert X
D-DSX-04-02
Regular price
$232.00
Save $-232.00
Fits: DUCATI Desert X 2022 - 2023
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. 22 lbs / 10 Kg load capacity
Available in satin black powder coat or clear anodized natural silver to prevent oxidation
NOTE: These designs do not support Givi, KAPPA type boxes (Drilling holes would be needed, and add-on hardware purchased
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Upper Crash Bars for Ducati Desert X
D-DSX-17-01-T
Regular price
$584.00
Save $-584.00
Upper Crash Bar and Engine Guards for Ducati Desert X
Fits: Ducati Desert X 2022-2023
Protect your Desert X from damage with the SRC Crash Bar/Engine Guard. Easily installed in minutes with common hand tools.
Constructed of strong yet lightweight Aluminum and processed in state-of-the-art laser cut and CNC bending machines.
Available Electropolished Stainless Steel silver or Satin Black Powder Coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
Welded using TIG process and Shot blasted to remove all residual stresses, before surface protection process
CNC Laser cut bracketry and mounts for a precise fit
Sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
Coating gives the Crash Bar adequate corrosion resistance to endure all weather conditions
Includes Compatible Hardware, Bracketry, Sacrificial Slider Guards made out of Compression Molded Resin to give it strength and take the impact in the event of a fall (easier and economical to replace in the event of a tip over)
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Full Rack System CRF HONDA 450 L & RL 2019-2024
H-CRF450RL-04-02-AL
Regular price
$414.00
Sale price
$348.75
Save $65.25
SRC Designs Full Rack System for the 2021-2024 Honda CRF 450 L & RL
Top rack surface dimensions are roughly 14” long and 9’ wide at the front, tapering to 8” at the rear.
Side racks add other 12” X 6” top surface making the full rack top surface roughly 14” X 20”
Side rack dims are approximately 12” X 8”
This is the Adventure Rack System you want!
Innovative modular design made of high-strength lightweight aluminum alloy
The SRC Designs Full Rack System includes left and right pannier racks, center tail rack, mounting hardware, and instructions (easily installed in about 30 minutes with common hand tools)
The Full Rack System features:
High-quality stainless steel mounting hardware, mounts using the existing steel subframe rack points (no drilling required)
Pre-Drilled for MOTO STUFF Fuel can quick-release mount. (Not compatible with ROTOPAX) Although a ROTOPAX can be installed on the exterior sides., just not on the interior as shown as the ROTPAX is too tall.
Side racks and top rack feature strategically positioned strap slots for quick and secure attachment of most brands of soft luggage.
Center Tail Rack is nicely sized and provides a nice solid foundation for luggage, camping gear, etc. The aluminum rack mounts to the stock steel subframe points (where the stock strap bolts are located).
Powder-coated satin black for a long-lasting durable finish that looks great on the 450RL
Fitment includes:
Honda CRF 450RL 2019-2024
Available add-ons include (See our site):
MOTO STUFF Fuel can
Please Note: The CRF 300L/Rally specifications indicate a max subframe load of 35 lbs. We have been loading our racks with nearly 60 pounds of gear for the past 2 years and have put about 8,000 miles on our 2 Honda's over all types of terrain and we have not had any issues with the racks or subframe, but the more extreme your usage, it is something to be aware of and take into consideration.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Engine Guard / Skid Plate Ducati Desert X
D-DSX-09-01
Regular price
$618.00
Save $-618.00
Protect your Desert X's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 4mm thick aerospace-grade aluminum sheet with stainless hardware
Gussets are welded with parity to the parent material and anodized to provide strength and protection from corrosion
Developed for on and off-road use
Cutouts allow access to common service points without the need for the removal of skid plate
Compatible with SRC Crash Bars (when installing skid plate and crash bars, use the longer crash bar bolts at the lower forward attachment points)
Available in both Silver Aluminum and Satin Black Powder Coat options
Looking for a great deal? Check out our closeout and overstock sections!
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.