You may also like
Auxiliary Electrical Accessory Options HONDA CRF 250L Rally/300L Rally 2017-2025
250 RALLY/300 RALLY USB A
Regular price
$68.00
PLEASE DOUBLE CHECK YOUR SELECTION BEFORE CHECKING OUT!
Fits 2017 to 2025 Honda CRF 250L Rally/300L Rally models
HONDA was nice enough to include a handy 10 AMP* switched accessory lead that is clipped inside the left front fairing on the CRF 250L Rally & 300L Rally models, however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors and built them. All leads are 18" long and allow for safe routing from the left upper fairing, following the factory harness routing to the Rally tower and the mount easily installs using a rubber well nut.
Two options are available to choose from: 12-volt & Dual USB
Please note, the 250 & 300 installs are the same.
Please select between these two versions of the Electrical Accessory Lead:
- Dual USB option
- 12-Volt Socket option
Dual USB Version: This is a high-quality dual USB charger with an OE appearance featuring a water-resistant spring-loaded hinged cover. The dual USB charger outputs 2.1 amps for fast phone charging and features a blue led indicator to let you know it's on. Easily installed in just a couple of minutes, all you need is an 8mm wrench or socket to tighten the well nut to secure the bracket to the Rally Tower tube. (remove the rubber plug from the left end of the upper tower bar and insert well nut and snug it up until the bracket is secure!) And plug the other end into the auxiliary power connector inside the left fairing of the Rally.
12 Volt Socket Version: (cigarette lighter style) This is a high-quality 12-volt socket we developed to offer an OEM appearance, with a water-resistant hinged spring-loaded cover. Easily installed in just a couple of minutes, all you need is an 8mm wrench or socket to tighten the well nut to secure the bracket to the Rally Tower tube. (remove the rubber plug from the left end of the upper tower bar and insert well nut and snug it up until the bracket is secure!) And plug the other end into the auxiliary power connector inside the left fairing of the Rally. (2017-2019 CRF 250L kit mounts on the front side of the top right fork triple clamp)
Also available on our site: USB Adapter- For your convenience, We've sourced a rugged Dual USB charger with aluminum housing for use with the 12 Volt socket kit- in the electrical Accessory section of our website.
* This is a 10 AMP Switched circuit (fuse #5 on the Rally), which means it is turned off and on by the bikes ignition switch.
Here's a shortlist of the average current draw for popular accessories:
- Heated Grips 3-5 AMPS
- USB Phone Charger 1-2 AMPS
- Heated Gloves 3 AMPS
- Heated Jacket 8 AMPS
- Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
Quick Rally install overview for those of you that may not be familiar with well nuts.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DoubleTake Adventure Mirror Set
DTM
Regular price
$145.00
Our kit includes DoubleTakes full adapter kit to allow fitment to all adventure bikes.
- This kit fits almost any motorcycle make and model - Each pair comes with a Universal Adapter Kit which includes two 10 x 1.25mm Extensions, two 10 x 1.5mm BMW adapters, and one Reverse-Thread Adapter.
- Here is a quick list:
- HONDA: 250L, Rally, CB500X, NC750, Africa Twins
- KAWASAK: 300X Versys, Versys 650, Versys 1000
- KTM: All adventure models
- SUZUKI: V-Strom 650, V-Strom 1000
- TRIUMPH: Tigers
- Royal Enfield: Himalayan
- DUCATI: Multistrada
- BETA: 500RR-S
- BMW: 310 GS, 310 R, 800 GS, 1200 GS, 1200 GS
- YAMAHA: FJ-09, Tenere 700
- And many more!
Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable DoubleTake ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion. We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility are most important to us and that's why we run the DOUBLETAKE ADVENTURE mirrors on all of our bikes.
Kit includes: 2 mirrors, 2 - 6" RAM Arms, 2 - 1" RAM Ball mounts, and thread adapters for your bike if needed, a small tube of Loctite thread locker (SRC exclusive!) Apply thread locker to adapter and ball mount threads to prevent your mirrors from vibrating loose. Everything you need to install them in just a few minutes on most bikes!
Install Tip: We recommend using one of the extension arms tightly clamped onto the ball mount to tighten the ball mount (and adapters if needed) into the mirror mounts of your bike.
PS- If you are price shopping, please note that we include the correct adapters and spacers for the specific models below as well as Loctite thread locker to keep them from vibrating loose!
Below is the DoubleTake Mirror inventors story of how the DoubleTakes came to be-
This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.# double take
Crash Bars / Engine Guard with integrated skid plate HONDA CRF 300L Rally 2021-2025
H-CRF300RL-V3-17-01
Regular price
$348.00
Product instructions located here
Protect your 300L Rally's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's innovative heavy-duty skid plate/crash bar combo!
The innovative desing features an integrated aluminum skid plate and is lighter and increases structural integrity over the competitins 2 piece designs.
In regards to a conventional full upper and lower crash bar set for the Rally, It’s SRC’s opinion that the upper front side fairing mounts aren’t strong enough for a full crash bar set. The only upper attachment point is on the bikes Rally tower frame and any impacts to the crash bar would end up damaging the tower frame structure, so they developed this kit below. Plus in most falls, the end of the handlebar and footpeg hold the bodywork away from the ground.
To Clarify-
The commonly used upper front plastic shroud attachment point is part of the headlight , instrument display and windscreen tower structure and is easily bent/ damaged in a light fall/tip over as it is of light tubing construction.
This kit does not fit the 250L or 250L Rally!
300L model owners: *see detail at the bottom of this page regarding installation on the 300L.
- Stout 1" (25mm) drawn over mandrel crash bar tube (DOM) with 1/8" (3mm ) wall thickness
- Skid plate is made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware.
- Developed for on and off-road use
- Cutouts allow access to common service points without the need for removal of skid plate
- Weight 16.5 lbs / 7.5kg
* We have had inquiries about fitting this kit to the 300L, and it does fit, but be aware that the crash bars are positioned a couple of inches away from the motor to clear the Rally's bodywork. Here are a few photos from a customer that installed them on his new 300L recently.
