TACKFORM ENDURO Phone / GPS Mount

TFEN-BIKE

$59.95

TACKFORM ENDURO
The Tackform Enduro Motorcycle Mount is the ultimate phone mounting solution when looking to mount a smartphone on your Motorcycle, Dirt Bike, 4 Wheeler, Quad, Snowmobile, you name it. Made from high strength aluminum and designed to last a lifetime. This motorcycle mount will endure the roughest of terrain while keeping your phone seated securely in the phone cradle. You can easily place or remove the phone with a single hand. Your phone can be mounted in both landscape or portrait mode. The rock solid ball and socket joint allows you to swivel the phone to any desired viewing angle. If you like to go fast and want a mount that will outlast you, you've come to the right place.

Buy it now - Use it forever - Lifetime Guaranteed

COMPATIBILITY
Works seamlessly with all cell phones and devices up to 3.4 inches wide and 5/8" thick. This includes all standard and Plus sized iPhones with or without a protective case. Samsung Galaxy, LG, HTC, you name this motorcycle phone mount will hold it.. Securely.
The beauty of this mount is you're able to get any phone, with any phone case, in and out of the cradle with a single hand. Loaded with dual industrial spring creating a rock steady hold on your cell phone while allowing to easily get the phone in and out of the cradle with a single hand.

INSTALLATION
Installation is a breeze - 2 Minute Installation
The kit comes with 3 custom fittings for 7/8", 1" and 1-1/4" bars (Also, works with 1.31" over-sized road bike or mountain bike Bars.) And fits all SRC GPS Bars
1. Simply place the appropriate spacer over the bar. Connect the clamp with the included wrench and two screws.
2. Loosen the ball and socket joint and position the phone into the desired position. Lock into place.
3. From here you will be able to easily place and remove your phone from the mount with a single hand.
Ride off into the sunset...

TACKFORM ENDURO Overview

Installation Overview below

SRC Replacement Crash Bar Pads

P-PK-01-01

$19.00

SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over. If you do happen to scratch one up, you can easily remove it and install a freshie!

These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter.

Please Note: These are not solid frame sliders. Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.

Price is per replacement pad. (order 1 pad, get 1 pad)

DANGO Gripper Mount for GoPro and other POV cameras

DD-GM-BK/GY-1

$49.95

The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

Compatible with Dango Design Gripper Mount and other action camera mounts
- All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included

Hardware Included in add on accessory adapter kit*

20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

DANGO Gripper Mount for GoPro and other POV cameras

Gas / Jerry Can

O-OT-01-01

$86.00 $78.00 Save $8.00

MOTO STUFF Fuel/Jerry Can with mount

Please select the application for your bike below:

Rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack. Includes quick release mount and hardware that easily attaches to the SRC rack, which is pre-drilled for this mount.

Please select the application for your bike below:

Can dimensions. 10" tall X 5" thick X 8" wide

Gas / Jerry Can kit Universal / Himlayan

250L & Rally, 300L & Rally, and 450L & RL kit

Kriega US-30 Drypack Soft Luggage

KUSC30

$219.00

Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

Kriega US-30 Drypack

The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.

Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.

Features:

100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
Acetal ITW Airloc buckles
YKK water-resistant zips
6061-T6 alloy fitting hooks
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
1 x set US Alloy Hook Straps included
10-year guarantee
30-liter capacity
445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)

Kriega US-DRYPACK HOOK STRAP SET

KAMBS

$39.00

OS-STRAPS (pair)

Kriega OS-Straps

Fit: Upgrade alloy hooks for (pre-2012) US-10 and US-20 tailpacks or replacement fitting set for US-10, US-20 & US-30 DRYPACKS.

FEATURES

Hook: Upgrade alloy hook straps for older generation US-10 and 20 packs (standard on post 2012 product). Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.

Fitting: NB - Some bikes already have web loops attached to the seat-pad/base. In this case we still recommend the fitting of the Kriega loops, as fitting to the subframe is far stronger than to the seat.

Remove bike seat and locate the best mounting areas on the rear subframe. It may be necessary to slot the internal plastic tray if no subframe metalwork is exposed. Attach the 4x 20mm web loops securely to high strength areas of the frame. The 20mm loops are adjustable in length. Final adjustments should be carried out with the seat/pad fitted. Once set, the web must be threaded back through the adjuster to lock-off the webbing. See the threading diagram on this page. To fit the US-pack, hook on the web loop, attach the top quick-release buckle and cinch down the bag on to the bike. Always use the 2 x strap keepers on the web to manage the loose ends. Please also ensure that the quick-release buckles are correctly 'clicked'

TECH-SPECS

Custom 6061-T6 alloy hooks
Multi-position: inline or across bike seat
Easy on/off bike
No loose straps left on bike
Std. strap length 600mm
4 x Acetal ITW Airloc buckles
4 x 20mm sub-frame loops
10-year guarantee

WEIGHT: 200.00 Grams

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

KRIEGA US-DRYPACK HOOK STRAP (Single)

KAMBS1S

$16.00

Kriega US Alloy Hook Strap

The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.

Features:

1 x quick-release strap with alloy buckle
Custom 6061-T6 CNC-milled aircraft grade alloy
Easy on/off
600mm
Does not include subframe loop

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega Overlander OS-6 ADVENTURE PACK

KOS6

$104.00

OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

Mount directly to most rear racks
Mount to an OS-BASE as a side pannier or tail pack
Mount as a tail pack with Kriega OS RACK LOOPS
Hook on to an OS-32 pannier (front, rear or top)
Mount directly to most front crash bars
Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

320(h) x 200(w) x 90(d) mm
12.5(h) x 7.9(w) x 3.5(d) ins.

CAPACITY: 6 Litres - 366 cu in

WEIGHT: 550g - 19.4 oz

Kriega Cam Straps

KACS150

$22.50

KRIEGA LUGGAGE CAM STRAPS

A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.

Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.

1.5M (5ft) long, high quality 1" webbing

Low weight - 1.7oz / 50g per strap

WEIGHT: 3.5oz - 100g

Kriega US-20 Drypack Soft Luggage

KUSC20

$195.00 $188.00 Save $7.00

Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.

Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.

The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.

Kriega US-20 dry pack features:

100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
420D nylon ripstop - lightweight yet extremely strong
6061-T6 alloy fitting hooks
Acetal ITW Airloc quick-release buckles
YKK water-resistant zip on side pocket
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
US Alloy Hook Straps included
10-year guarantee
20-liter capacity
15.7" H x 10.2" W x 7.5" D

DANGO Gripper Mount Accessory adaptor/extension kit

DD-GM-BK/GY/AK

$7.95

Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

Compatible with Dango Design Gripper Mount and other action camera mounts
- All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included

Hardware Included in add on accessory adapter kit*

20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

DANGO Gripper Mount Accessory adaptor/extension kit

Hippo Hands

BACKCOUNTRY

$129.95

Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.

Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.

Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.

Choose from three different models to suit your type of riding and motorcycle:

Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep

Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!

Rouge - Mid-sized motorcycle hand covers - 10.5" Deep

Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.

Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure

The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.

Sold in pairs

Your bike must have hand or brush guards installed to fit properly.

View product video instructions here:

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

KRIEGA OS-Bottle Holder

KOSBOT

$72.00

OS-BOTTLE

The OS-Bottle is a versatile heavy-duty bottle holder. Hook-on to an OS-PANNIER, US-DRYPACK or TANK and you have easy access to 2 x 1 litre drink or fuel bottles.
Max bottle size 80mm dia x 280mm long (3˝x 11˝)

FEATURES

• Ultra-tough Hypalon construction
• Draw-string and compression strap retainer
• Aircraft grade alloy buckles
• Heavy-duty Acetal cam buckles
• 10 YEAR GUARANTEE

TECH SPECS

DIMENSIONS

250(h) x 180(w) x 60(d) mm
8.2(h) x 6(w) x 2.3(d) ins.

WEIGHT: 375g - 13.2 oz

Kriega US-10 Drypack Soft Luggage

KUSC10

$132.50

Kriega US-10 Drypack

Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!

Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.

The US-10 Drypack provides 10 liters of storage for those keep-dry essentials. Ideal for a full day on the bike when you may need to carry waterproofs, spares gloves or a tool kit.

FEATURES

Guaranteed 100% waterproof roll-top closure main compartment.
Universal-fit to any type of motorcycle.
Mount inline or across the seat / rear rack
Easy to fit with quick-release hooks attaching to web loops secured to the bike’s subframe.
Use individually or hook-on additional US-Drypacks to build your ideal luggage system up to 70 litres.
Side pocket and rear mesh pocket provide additional quick-access storage.
Use as a tank bag, with the addition of a Kriega TANK Converter. (Sold Separately)
Hook-on to most Kriega Back packs for additional waterproof storage.
excluding Max28, Hydro-2

DIMENSIONS
330(h) x 240(w) x 120(d)mm
13”(h) x 9.4”(w) x 4.7”(d)

VOLUME
10-Litres (600cu in) capacity

WEIGHT
500g / 17.6oz

SRC Staff Crew Neck T-Shirts

DM130L-SRCSS-M-M-BLK

$25.00

Congratulations, you found our shirts!

We made these logo t-shirts for our staff and based on requests for SRC apparel, we thought customers might like them too. You can even tell people you are employed here but, if you show up wearing one at BackFire Station we might give you a nametag and put you to work.

Perfect weight, wrinkle-free, ring spun soft fabric great for casual wear and comfortable under your gear while riding, wrenching, or doing all the above.

Available in white or black. Sizing listed below.

4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
1x1 rib knit neck
Tear-away label
Shoulder to shoulder taping

Men's sizes (chest size):

M 38-40"
L 41-43"
XL 44-46"
XXL 47-49

Women's sizes (chest size):

S 25-26"
M 37-38"
L 39-41"
XL 42-44"
XXL 45-47

Care Instructions

Machine wash cold with like colors. Only non-chlorine bleach. Tumble dry low. Warm iron if necessary

Front Master Cylinder Reservoir Guards Ducati Multistrada (D) #E-02-120#

D-M1200E-25-01-SL

$32.00 $20.50 Save $11.50

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the brake fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools. Don't risk being stranded with no brakes!

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state of the art laser cut and CNC bending machines

Product Instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Front Master Cylinder Reservoir Guards Ducati Multistrada (D) #E-02-120#

Center Stand Guard for Ducati Multistrada (D) #E-02-150#

D-M1200E-29-02-AL

$90.00 $40.50 Save $49.50

OVERSTOCK SALE!

Center Stand Guard for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the underside of your Multistrada from damage with the SRC Center Stand Guard. Easily installed in minutes with common hand tools.

Constructed of strong yet lightweight Aluminum and processed in state-of-the-art laser cut and CNC bending machines.

Customer input from Troy S. "This skid plate extender is perfect as there was a significant gap in coverage, leaving the rear header pipe completely exposed. This Center Stand Plate covers it giving more assurance I will not destroy the pipe as I surmount large logs, rocks, and berms."

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Center Stand Guard for Ducati Multistrada (D) #E-02-150#

Clutch Reservoir Cover for Ducati Multistrada (D)#E-02-120#

D-M1200E-26-01-SL

$32.00 $15.50 Save $16.50

Clutch Reservoir Cover for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the clutch fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools. Don't risk being stranded with no brakes!

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state-of-the-art laser cut and CNC bending machines

Available in your choice of satin black powder coat or natural brushed stainless steel finish.

Product installation info available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Clutch Reservoir Cover for Ducati Multistrada (D)#E-02-120#

Kriega OS-STRAPS

KOSS

$55.00

OS-STRAPS (pair)

Kriega OS-Straps

Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.

Features:

Aluminum end hooks
Nylon strapping
Hypalon anti-marring tabs
Sold as a pair

Front Brake Caliper Guard Ducati Multistrada (D) #E-02-120#

D-M1200E-16-02(D)

$63.00 $24.00 Save $39.00

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the front brake caliper from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools. Don't risk being stranded with no brakes!

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state of the art laser cut and CNC bending machines. Anodized for improved corrosion resistance

Installed quickly using common handtools.

Available in your choice of satin black powder coat or natural brushed stainless steel finish.

Price is per pair

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Front Brake Caliper Guard Ducati Multistrada (D) #E-02-120#

Kriega Tank - US Drypack Converter

KUSTK

$49.00

Converts a Kriega US-Drypack to a Tank Bag, compatible with US-5, US-10 & US-20 Drypacks plus OS-6 & OS-12 Adventure Packs.

Universal fit to most makes and types of bikes including bikes with metal and plastic tanks.
Easy to fit with frame loops at the front and hook & loop pads under the seat at the rear.
A scratch-resistant base fabric that holds the pack firmly in position and quick-release buckles give easy access to fuel filler.
Now with Cordura® fabric construction
Reflective logo print
Heavy-duty Velcro® fixing
10 YEAR GUARANTEE

FEATURES

WEIGHT: 250g / 8.8oz

PRODUCT CODE: KUSTK

Kriega OS-SHOULDER-STRAPS

KOAOSS

$25.00

OS-SHOULDER STRAP (sold each)

Convert your OS-ADVENTURE PACK or OS-32 /22 /18 SOFT PANNIER into a shoulder bag for easy carrying off the bike.

• Fits OS-6, OS-12, OS-18 , OS022 & OS-32 PACKS
• Length adjustable
• Ultra-tough HYPALON™ shoulder pad
• Aircraft-grade alloy buckles

WEIGHT: 100g

Kriega Roam Tool Tube

RSDRKTR-BB

$135.00 $108.00 Save $27.00

OVERSTOCK SALE!

ROAM TOOL ROLL

The Roland Sands Design X Kriega Roam Tool Roll is an indispensable piece of kit on any road trip. Store in your luggage or mount to the bike with the Velcro® Molle system, it’s a haven for your tools and spares. Constructed from RSD’s propriety heavy-duty wax cotton together with 1000D Cordura® and super tough Hypalon reinforcement, the blend of Classic and Modern materials with a technical twist. Unclip and roll-out to reveal four YKK® zip access pockets, 10 elastic loops, and a T6 alloy rail with 8 x 3/8" clips for socket management. Additional 1/4” and 1/2” socket rails can also be added. (sold separately)

Available in 2 color options: Black or Ranger.

Features:

• RSD waxed cotton and 1000D Cordura® construction

• 4 x 1-litre pockets with oversized YKK zips.

• 10 x elastic loops

• 6061-T6 alloy socket rail with 8 x 3/8" clips

• Optional 1/4" and 1/2" socket rails

• Hypalon MOLLE panel with 4 x VELCRO ONE-WRAP® straps

• Heavy-duty carry handle with grip fabric

• 10 YEAR GUARANTEE

Volume 4-Litres (244 cu in) capacity

Weight - 600g/21oz

Radiator Guards for Ducati Multristrada (D)

D-M1200E-02-02

$145.00 $75.50 Save $69.50

OVERSTOCK SALE!

Fits: 2014 - 2020 DUCATI MULTISTRADA 950 / 1200 / 1260

Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris.

This protector made from 2 mm thick Stainless steel and Symmetrical Honey-comb design is Laser cut on State-of-the-art machines 
Can be easily mounted in a few minutes with common hand tools on the radiator  
Available in brushed stainless steel or satin black powder-coat

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Radiator Guards for Ducati Multristrada (D)

Kriega OS-Rack Loops

KOSRL

$55.00

Kriega OS-Rack loops

The ultra-lightweight alternative to a rear luggage rack. Aircraft grade alloy and laser-cut Hypalon™ construction. Unique low-profile fasteners fit any style bodywork, even rear fuel tank bikes.

• Fit any Kriega OS-ADVENTURE PACK to any off-road bike.
• Perfect for mounting roll-top bags and tents.
• Ultra secure whatever the terrain.
• Lightweight T6 alloy - only 0.8 oz / 25g per loop.
• Easy fit, just drill 4 x 6mm holes.
• 4 x Rack Loops per pack.

WEIGHT: 3.5oz / 100g

Oil Cooler Guards for Ducati Multristrada (D)#E-02-120#

D-M950-29-01-AL

$106.00 $74.50 Save $31.50

Fits: 2014 - 2020 DUCATI MULTISTRADA 950 / 1200 / 1260

Robust enough to protect the vulnerable and expensive oil cooler against flying stones and other debris.

This protector made from 2 mm thick Stainless steel and Symmetrical Honey-comb design is Laser cut on State-of-the-art machines 
Can be easily mounted in a few minutes with common hand tools on the radiator  
Available in brushed stainless steel or satin black powder-coat

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.