Oil Cooler Guards for Ducati Multristrada (D)#E-02-120#

Fits: KAWASAKI VERSYS 1000 models

Protect the vulnerable ABS Sensors from rocks, road debris and tip over impacts with these slick stainless steel guards laser cut from 2mm stainless. 

• Kit includes front and rear guards
• Easy 5-minute install using the stock fasteners and common hand tools
• Available in natural silver stainless finish

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 SRC Designs Cargo Tail Rack for Yamaha Ténéré 700

CLOSEOUT SALE! 

The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  This rack also includes stainless steel support brackets and is rated for up to 22 lbs  (10 Kg) of gear. 

Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1  top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics.

This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.

Pre-drilled for our 3L fuel can mount

Available in Satin Black powder coat

Fitment:

• Yamaha Ténéré 700 years 2020 - 2024*
• • Black powder-coated 3.25mm aluminium top plate
    
  • 25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution.  Plus acts as much much-needed grab handle!
  • Fits to 4 x existing mounting points on rear of bike
  • Supplied with 4 x stainless steel standoffs to replace existing OEM units 
  • Includes all stainless steel mounting bolts & counter-sunk washers
  • Flat section of the rack sits  approximately 10mm above the passenger seat (standard OEM seat)
  • Slotted all around to cater for plenty of tie-down points
  • Pre-drilled to fit SRC 3 liter plastic fuel tank
  • Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
  • Quick & easy fitment
    
  
  

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSE OUT!

Fits- KTM 790/890 ADV 2020-23'

• Made out of 3 mm (1/8") thick Aluminum material and Laser cut to precision
• Cargo Bags can be easily tied-up through the Slots provided on the Front and Back side. 
• Compatible Hardware and Bracketry for easy mounting.
• Gussets are welded with parity to the parent material and Powder coated to prevent corrosion.
• Quick, easy, and DIY fitment 
• Rack Surface is 12" wide at the front, tapering to 9" at the back, and 10" long. 
• Rear rack plate is mounted onto bike using a 3mm stainless steel sub bracket unit that is super strong
• Note: This rear rack does not have any pre drilled mounting holes for Kappa, GIVI or Monokey hard cases.

Available in Satin Black powder coat or clear anodized silver:  Please note, the Silver rack only has the aluminum top cargo rack portion in silver as the tube frame is made of carbon steel and is powder-coated black satin. 

5.25lbs

Fitment: KTM 790/890 ADV 2020-23'

Installation instructions and VIDEO

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  22 lb / 10Kg load capacity

The rack is 12" long and 12" at the front and tapers to 11" wide at the rear.

Available in satin black powder coat or clear anodized natural silver to prevent oxidation 

Available for model years:

• Option 1: 2014-2015  - Suzuki V-Strom 650
• Option 2: 2017-2021 - Suzuki V-Strom 650 -&-  2017-2020 - Suzuki V-Strom 1000

NOTE: Accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in some of the images) is NOT included and no longer available. 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Clutch Reservoir Cover for Ducati Multistrada

Fits: 2015-2020 Ducati Multistrada 950 / 1200 / 1260

Protect the clutch fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools.  Don't risk being stranded with no brakes! 

Constructed of strong yet lightweight 2mm Stainless Steel and processed in state-of-the-art laser cut and CNC bending machines

Available in your choice of satin black powder coat or natural brushed stainless steel finish.  

Product installation info available here

* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

Fits: KTM 790/890 ADV 2020-22'  ( Orange has sold out) 

Protect your KTM 790/890 Adv's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty crash bars & skid plate.

This crash bar is designed to prevent damage from falling, bumps as well

• Full lower crash bars plus skid plate - sold as a set

• Made from 1 ' thick Stainless steel tube 1.8 mm. Cut by modern laser machine and tube bender on CNC machine

• Tube wall thickness 2mm  

• Crash bars also house a 3mm stainless steel plate to protect fuel tank on both sides of the bike

• 4 x Main mounting points on each side of the bike for maximum strength

• Skid plate material - 4mm aircraft grade aluminum plate

• Beautiful and strong connection seams

• Available in powder-coated KTM Orange and electropolished Silver

• The shockproof cover helps to hold the crash bar and reduce impact from falling

• Supplied with all stainless steel brackets & mounting components 

• Easy to assemble, convenient, and fast, there is a manual for installation. And can be downloaded from the SRC website.

Installation instruction video