The single biggest complaint from CRF 250l owners is that the suspension is sprung way too light and the damping is inadequate. The bike seems to be set up for a 100-pound beginner rider- Here's how to fix that. A heavier spring or adjusting the pre-loadwill not resolve the issue.
Ohlins STX46 Shock for 2013-2020 CRF 250L The shock is equipped with a stiffer spring for 150-185 lb riders (68 - 84 kg) and offers precise rebound and damping control. (If you are installing on an ABS model, please click here to view the ABS install supplement sheet) The kit comes with great instructions and there is an installation video below.
Unfortunately, Ohlins does not offer a stiffer spring for the 250L. The best you can do is run the compression and rebound 20% firmer than normal and run your preload at the stiffer end of the sag setting.
We recently installed the kits on our CRF's and noted 3 things that are sort of glossed over in the instructions.
1- When installing the rear shock, the remote reservoir line at the top of the shock must be oriented so the line is positioned towards the rear of the bike and the line routed around the left side of the shock towards the front of the bike where the reservoir mounts on the left side of the engine.
2-Removing the top shock bolt isn’t too hard, but re-installation takes 2 people. One to operate a ratchet installing the top shock bolt from the right side of the bike and a second person to position the nut in place from the left side of the bike using a magnetic pickup
tool or by taping the nut to the end of a screwdriver. The airbox/battery bracket is what’s in the way-
3- To remove the fork spring, you need to remove a steel retaining clip located inside the fork tube at the top of the spring. It takes 2 people to do this. One to use a flat blade screwdriver or similar tool to depress the spring a bit while the other person uses a dental pick or similar tool to pull the retainer clip out of the groove. There's not a lot of preload on the spring, so it's not dangerous, it's just a tight space that requires 3- 4 hands! :-)
PLEASE DOUBLE CHECK YOUR SELECTION BEFORE CHECKING OUT!
Fits 2017 to 2025 Honda CRF 250L Rally/300L Rally models
HONDA was nice enough to include a handy 10 AMP* switched accessory lead that is clipped inside the left front fairing on the CRF 250L Rally & 300L Rally models, however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors and built them. All leads are 18" long and allow for safe routing from the left upper fairing, following the factory harness routing to the Rally tower and the mount easily installs using a rubber well nut.
Two options are available to choose from: 12-volt & Dual USB
Please select between these two versions of the Electrical Accessory Lead:
Dual USB option
12-Volt Socket option
Dual USB Version:This is a high-quality dual USB charger with an OE appearance featuring a water-resistant spring-loaded hinged cover. The dual USB charger outputs 2.1 amps for fast phone charging and features a blue led indicator to let you know it's on. Easily installed in just a couple of minutes, all you need is an 8mm wrench or socket to tighten the well nut to secure the bracket to the Rally Tower tube. (remove the rubber plug from the left end of the upper tower bar and insert well nut and snug it up until the bracket is secure!) And plug the other end into the auxiliary power connector inside the left fairing of the Rally.
12 Volt Socket Version:(cigarette lighter style) This is a high-quality 12-volt socket we developed to offer an OEM appearance, with a water-resistant hinged spring-loaded cover. Easily installed in just a couple of minutes, all you need is an 8mm wrench or socket to tighten the well nut to secure the bracket to the Rally Tower tube. (remove the rubber plug from the left end of the upper tower bar and insert well nut and snug it up until the bracket is secure!) And plug the other end into the auxiliary power connector inside the left fairing of the Rally. (2017-2019 CRF 250L kit mounts on the front side of the top right fork triple clamp)
Also available on our site: USB Adapter-For your convenience, We've sourced a rugged Dual USB charger with aluminum housing for use with the 12 Volt socket kit- in the electrical Accessory section of our website.
* This is a 10 AMP Switched circuit (fuse #5 on the Rally), which means it is turned off and on by the bikes ignition switch.
Here's a shortlist of the average current draw for popular accessories:
Heated Grips 3-5 AMPS
USB Phone Charger 1-2 AMPS
Heated Gloves 3 AMPS
Heated Jacket 8 AMPS
Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
Quick Rally install overview for those of you that may not be familiar with well nuts.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DoubleTake Adventure Mirror Set
DTM
Regular price
$145.00
Save $-145.00
Our kit includes DoubleTakes full adapter kit to allow fitment to all adventure bikes.
This kit fits almost any motorcycle make and model - Each pair comes with a Universal Adapter Kit which includes two 10 x 1.25mm Extensions, two 10 x 1.5mm BMW adapters, and one Reverse-Thread Adapter.
Here is a quick list:
HONDA: 250L, Rally, CB500X, NC750, Africa Twins
KAWASAK: 300X Versys, Versys 650, Versys 1000
KTM: All adventure models
SUZUKI: V-Strom 650, V-Strom 1000
TRIUMPH: Tigers
Royal Enfield: Himalayan
DUCATI: Multistrada
BETA: 500RR-S
BMW: 310 GS, 310 R, 800 GS, 1200 GS, 1200 GS
YAMAHA: FJ-09, Tenere 700
And many more!
Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable DoubleTake ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion. We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility are most important to us and that's why we run the DOUBLETAKE ADVENTURE mirrors on all of our bikes.
Kit includes: 2 mirrors, 2 - 6" RAM Arms, 2 - 1" RAM Ball mounts, and thread adapters for your bike if needed, a small tube of Loctite thread locker (SRC exclusive!) Apply thread locker to adapter and ball mount threads to prevent your mirrors from vibrating loose. Everything you need to install them in just a few minutes on most bikes!
Install Tip: We recommend using one of the extension arms tightly clamped onto the ball mount to tighten the ball mount (and adapters if needed) into the mirror mounts of your bike.
PS- If you are price shopping, please note that we include the correct adapters and spacers for the specific models below as well as Loctite thread locker to keep them from vibrating loose!
Below is the DoubleTake Mirror inventors story of how the DoubleTakes came to be-
This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
# double take
Rear Brake Master Cylinder Guard Royal Enfield HIMALAYAN
R-HM18-19-02
Regular price
Sale price
$32.00
Save $-32.00
Fits 2016 to 2023 Royal Enfield Himalayan and SCRAM 411 models
Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Available in brushed stainless steel or satin black powder coat finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side stand/Kickstand foot enlarger Royal Enfield Himalayan - SCRAM 411 (D)
R-HM18-14-01-SL
Regular price
$56.00
Sale price
$28.00
Save $28.00
CLOSEOUT SALE!
Made specific for Royal Enfield Himalayan & SCRAM 411
Keeps your side stand from sinking into soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Brake Fluid Reservoir Guard ROYAL ENFIELD HIMALAYAN (D)
R-HM18-15-01-SL
Regular price
$28.00
Sale price
$16.00
Save $12.00
CLOSE OUT!
Fits 2016 to 2023 Royal Enfield Himalayan and SCRAM 411 models
Protect the vulnerable rear brake fluid reservoir from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Available in brushed stainless steel or satin black powder coat finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
AFRICA SINGLE Sticker / Decal Set
AS-DECAL
Regular price
$6.95
Save $-6.95
Inspired by the CRF 250l Rally's bigger brother, the mighty Africa Twin.......
4" X 1.5", the perfect size for placement on the front fender, fairing, helmet, toolbox, just about anywhere!
