Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019)
Yeah, you can get cheaper bags, but you can't get better bags! :-) We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff!
Kriega US-30 Drypack
The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.
Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.
The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.
Features:
100% waterproof main body
420D Cordura Lite construction
HYPALON: abrasion resistant reinforcement
DRYPACK: removable tape-seamed liner (white)
Acetal ITW Airloc buckles
YKK water-resistant zips
6061-T6 alloy fitting hooks
Side access zip pocket (water-resistant)
Rear mesh pocket
Shoulder & waist straps
1 x set US Alloy Hook Straps included
10-year guarantee
30-liter capacity
445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)
Please select the application for your bike below:
Rugged 3l (.8 gallons) spare fuel container similar in design and function to the popular ROTOPAX cans, but shaped to fit inside the left rear SRC Pannier Rack. Includes quick release mount and hardware that easily attaches to the SRC rack, which is pre-drilled for this mount.
Please select the application for your bike below:
Can dimensions. 10" tall X 5" thick X 8" wide
GPS / Phone Accessory mounting Bar HONDA CB500X
H-CB500X-07-02
Regular price
$72.00
Sale price
$38.00
Save $34.00
OVERSTOCK SALE!
SRC DESIGNS GPS bracket bar 2016-2023 HONDA CB500X
Available in Satin finish stainless steel silver or satin black powder coat.
The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your bike. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this handlebar mounting adapter is built to go the distance.
The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a common 7/8" clamp.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware
Developed for on and off-road use
The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
Compatible & will fit withSRC, Hepco & BeckerandSW Motech upper & lower lower crash bars
Please note SRC skid plate is not compatible with the GIVI lower crash bars
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions.
*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock that pushed a slider mounting bolt into the engine case and cracked the case.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Radiator Guards HONDA CB500X
H-CB500X-02-02
Regular price
$78.00
Sale price
$44.00
Save $34.00
Overstock reduction Sale!
Fits HONDA CB500X 2013-2023
Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris. - This protector made of stainless steel sheet 304 grade 1.5 mm thickness - Can be easily mounted in a few minutes with common hand tools
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount for GoPro and other POV cameras
DD-GM-BK/GY-1
Regular price
$49.95
Save $-49.95
The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!
Dango Designs Gripper Mount Features:
Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.
Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
