450RL DIY
HONDA was nice enough to include a handy 10 AMP* switched accessory lead connector that is clipped to a metal bracket just behind the bottom of the left radiator (see photo in product listing), however, they have yet to release an accessory lead to plug into it! So we picked up the ball and sourced the correct original HONDA waterproof connectors. Leads are 24" long and allow for safe routing from the lower-left radiator area following the factory harness routing to the instrument cluster or handlebar area.
Plug and play Do-It-Yourself accessory lead version is easy to install, just unclip the stock connector cap, connect this lead and attach to your accessory with the included posi lock quick connectors! Posi Lock instructions are included in each kit. D-I-Y Kit includes 24" 2 circuit lead ( 18 gauge red 12V+ and Black ground) terminated with Posi Lock connectors with abrasion sheath and 2 black zip ties for secure installation. Posi-Lock® Connectors have been put to the test worldwide since 1997. Superior in-line splices with just hand tightening! These electrical connectors require no crimping or soldering. An electrical connector that meets the needs of todays OEM's, and is so good, it's reusable. Truly a connector for the 21st century.
* This is a 10 AMP Switched circuit, which means it is turned off and on by the bikes ignition switch.
Here's a shortlist of the average current draw for popular accessories:
Heated Pants 6 AMPS
WARNING: Most High output horns will draw too much amperage for this circuit. If you are planning to use a 12-volt compact air compressor, be sure to check it to make sure it does not draw more than 10 amps! Usually better to get a compressor that connects to your battery tender SAE connector and ensure it's got the proper capacity.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Hardware Included in add on accessory adapter kit*
Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO
Eagle Grit Hand Cleaner - 12 ounces
NB16
Kriega Subframe Loop Straps
KASLB4
Get an extra set so you can quickly move your US Drypacsk to another bike etc.
Simply thread around the bike subframe and back through the buckle.
4 x 500mm (20") lengths of webbing with loop and buckle at one end.
NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit.
WEIGHT
50g
12 Volt Socket USB Adapter
MS-USB adapter
12 Volt Socket USB Adapter- For your convenience, We've sourced a rugged Dual USB high output (2.10 quick charger circuitry) charger with aluminum housing for use with the 12 Volt socket kit- Available on the electrical accessories section of our site. It does not fit flush to the socket housing, so it keeps the cover about 3/4 of the way open, which provides easy access to the lower port as well as providing some protection against light rain/water exposure.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
KRIEGA US-DRYPACK HOOK STRAP (Single)
KAMBS1S
The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.
SRC Replacement Crash Bar Pads
P-PK-01-01
SRC Crash Bars have cool sacrificial nylon pads that are strategically positioned to be the point of impact if you happen to drop your bike or have a tip over. If you do happen to scratch one up, you can easily remove it and install a freshie!
These are designed to fit 1" diameter bars. All SRC bars are 1" and they should fit other brands of crash bars that are 1"/25mm diameter.
Please Note: These are not solid frame sliders. Frame sliders are designed to grind away in a fall on the pavement at speed. These are more for tip-overs at low speed to protect the crash bars from scratches etc.
Price is per replacement pad. (order 1 pad, get 1 pad)