Protect your CB500X vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of 11 gauge ( 1/8" / 3mm) thick 304 aluminum sheet with stainless hardware
Developed for on and off-road use
The SRC skid plate is compatible with the HONDA and aftermarket accessory center stands.
Compatible & will fit withSRC, Hepco & BeckerandSW Motech upper & lower lower crash bars
Please note SRC skid plate is not compatible with the GIVI lower crash bars
Cutouts allow access to common service points without the need for removal of skid plate
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Please note: The arm attachments may not work with aftermarket engine guards, please consult the installation guide or reach out to us with questions.
*Please note: The slider bars shown on the skid plate are no longer included. SRC recently made a decision to remove the nylon sliders from all of their skid plates after a customer hit a large rock that pushed a slider mounting bolt into the engine case and cracked the case.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Available electropolished 304 stainless steel silver or satin black powder coat steel
Stout 1" (25mm) tube with 1/8" (3mm ) wall thickness
CNC Laser cut bracketry and mounts for a precise fit
Sacrificial heavy-duty plastic guards at critical impact zones that are easily replaced if they are damaged in a tip-over
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
HEADLIGHT GUARD HONDA NX500
H-NX500-01-02
Regular price
$118.00
Save $-118.00
HEADLIGHT GUARD 2024-2025 HONDA NX500 - Constructed of 2mm stainless steel sheet and available in natural stainless silver or Satin Black Powder Coat - Pin & Grommet Style Mounting allows for quick tool-free removal for cleaning - Developed for on and off-road use
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Radiator Guards HONDA NX500
H-NX500-02-01
Regular price
$58.00
Save $-58.00
Radiator Guard HONDA NX500
Fits HONDA NX500 2025
Robust enough to protect the vulnerable and expensive radiator against flying stones and other debris. - This protector made of stainless steel sheet 304 grade 1.5 mm thickness - Can be easily mounted in a few minutes with common hand tools
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Tail Rack HONDA CB500X & NX500
H-CB500X-04-01-NEW
Regular price
$168.00
Save $-168.00
Fits 2012-2025 HONDA CB500X & NX500
Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your CB500X!
This rack includes a tubular structural support brace that greatly improves the load capacity compared to other racks that simply attach directly to the subframe. You can safely carry up to 35 lbs (16 Kg's) with this rack system.
Rack is approximately 11"wide at the front and tapers to 8" in the rear and is 11" long.
No drilling or modifications required, easily mounts in under an hour with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
GPS/Phone BAR FOR 2024 HONDA TRANSALP, HONDA NX500 & Royal Enfield Himalayan 450
P-GPS-07-01
Regular price
$65.00
Save $-65.00
GPS Phone BAR FOR HONDA TRANSALP, HONDA NX500 & Royal Enfield Himalayan 450
Fits:
2023-2025 HONDA TRANSALP
2024-2025 HONDA NX500
2024-2025 ROYAL ENFIELD HIMALAYAN 450 ............................................................................................... 1. Includes the mounting brackets made from 2 mm Stainless Steel sheet for improved Corrosion resistance properties and Laser cut and CNC Bent on State-of-the-art machines 2. The GPS Bar, is made out of Stainless Steel Bar stock 22mm diameter 97/8") with Welded End Adaptors and Compatible Hardware 3. The Surface is Electro polished to improve its aesthetic appearance and removal of scratches 4. Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site 5. Fits all HONDA TRANSALP's, HONDA NX500's & Royal Enfield Himalayan 450
