Hippo Hands are the original motorcycle hand covers and each pair is made using high-quality craftsmanship and the best available, weather-resistant materials.
Hippo Hands are covered with HippoSkin™, a waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed-cell foam insulation—both are designed to keep inclement weather away from your hands.
Cold hands while riding can turn an amazing ride into pure misery. The way we prefer to look at it is that keeping cold wind, rain and snow off your hands improves every ride. Hippo Hands keep your hands dry in a wind-free, warm, fleece-lined sanctuary, making a long ride more pleasant and safer for the rider.
Choose from three different models to suit your type of riding and motorcycle:
Backcountry - Enduro & dirt bike motorcycle hand covers - 9" Deep
Designed for Enduro and dirt bikes, they are also a great option for Harleys/cruisers that have swept back bars. Email us with your model if you are unsure. Harleys require hand guards installed to properly support Hippo Hands or any hand covers. Riders who want a smaller hand cover that still offers very good protection but is better suited for standing while riding choose the Backcountry model. We have many customers who love them for cool, wet single-track excursions. These are built to last!
Rouge - Mid-sized motorcycle hand covers - 10.5" Deep
Mid-sized versatility. Fits a myriad of adventure and sport touring bikes, as well as some scooters, and other bikes. It is our commuter rider's model of choice. It offers a large hand opening that stays open at high speeds and they are designed to be fitted over brush/hand guards.
Alcan — Max coverage ADV/touring motorcycle hand covers - 12" Deep with forearm enclosure
The Alcan™ is a maximum coverage, all-weather hand cover that fits adventure bikes, sport touring bikes, and many others. The Alcan is for riders who embark on cold, wet-weather rides and longer tours. These are the absolute warmest hand covers on the market. These fit BMW GS 1200/1250/850/650, KTM 1290/890/790, Africa Twin, HD Pan America and comparable bikes great.
Sold in pairs
Your bike must have hand or brush guards installed to fit properly.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect the clutch fluid reservoirs from flying debris and tip-over damage with the SRC aluminum protective reservoir guards. Easily installed in minutes with common hand tools. Don't risk being stranded with no brakes!
Constructed of strong yet lightweight 2mm Stainless Steel and processed in state-of-the-art laser cut and CNC bending machines
Available in your choice of satin black powder coat or natural brushed stainless steel finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
SRC Staff Crew Neck T-Shirts
DM130L-SRCSS-M-M-BLK
Regular price
$25.00
Save $-25.00
Congratulations, you found our shirts!
We made these logo t-shirts for our staff and based on requests for SRC apparel, we thought customers might like them too. You can even tell people you are employed here but, if you show up wearing one at BackFire Station we might give you a nametag and put you to work.
Perfect weight, wrinkle-free, ring spun soft fabric great for casual wear and comfortable under your gear while riding, wrenching, or doing all the above.
Available in white or black. Sizing listed below.
4.5-ounce, 50/25/25 poly/combed ring spun cotton/rayon, 32 singles
1x1 rib knit neck
Tear-away label
Shoulder to shoulder taping
Men's sizes (chest size):
M 38-40"
L 41-43"
XL 44-46"
XXL 47-49
Women's sizes (chest size):
S 25-26"
M 37-38"
L 39-41"
XL 42-44"
XXL 45-47
Care Instructions
Machine wash cold with like colors. Only non-chlorine bleach. Tumble dry low. Warm iron if necessary
DANGO Gripper Mount for GoPro and other POV cameras
DD-GM-BK/GY-1
Regular price
$49.95
Save $-49.95
The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!
Dango Designs Gripper Mount Features:
Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
Flexible front web conforms to your object.
Robust dual torsion spring provides strong clamping force.
2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included.
Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
DANGO Gripper Mount Accessory adaptor/extension kit
DD-GM-BK/GY/AK
Regular price
$7.95
Save $-7.95
Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below:(recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation)
Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms. Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.
Add On Accessory Adapter Kit Features
Compatible with Dango Design Gripper Mount and other action camera mounts
All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
All hardware included
Hardware Included in add on accessory adapter kit*
20 mm Universal Extension Arm with Screw
35 mm Universal Extension Arm with Screw
1/4”-20 Universal Camera Adapter
* Gripper Mount and GoPro camera not included
Here's an independent review of the Dango Gripper mount for GoPro by the popularYouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is. You can check out more of Daniels work at his YouTube channel here:ReturnOfDeeO
Kriega Cam Straps
KACS150
Regular price
$22.50
Save $-22.50
KRIEGA LUGGAGE CAM STRAPS
A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.
Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.
1.5M (5ft) long, high quality 1" webbing
Low weight - 1.7oz / 50g per strap
WEIGHT: 3.5oz - 100g
Kriega Rally Pack
KRR25
Regular price
$88.00
Save $-88.00
FEATURES
Pack
100% waterproof bolt-on waterproof fender pack made from 1000D Cordura. 2.5L (150 cu in) capacity – ideal for safety equipment, small tools, dry gloves, etc. Innovative ‘flush’ alloy fasteners included (see fitting).
Base
Ultra-tough Rhinotek fabric on base with 4 x heavy-duty rivets. All fasteners for dirtbike fender are included (see fitting). Pack also has a removable(hook and loop) waterproof liner for cleaning or replacement.
Fitting
Remove the white liner (hook and loop, top edge) and remove the bag from the packaging. Included with the Rally pack are 4 x alloy/stainless fasteners with nylon spacer washers. The product packaging is designed to used as a drilling guide.
Line up the guide on the rear fender and drill 4 x 6mm diameter holes. Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam). Tighten anti-clockwise and always use thread lock. Allow 24 hours to dry.