CLOSEOUT SALE ! 

SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2025* 

2020-2021 full and lower kits are compatible with SRC skid plate.

*2022-2023 models, you can not use the SRC V2 skid plate and lower crash bars. 

PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine. 

Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022.  If you are unsure of how to order, shoot us an email for assistance. 

Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit

Available Electropolished Stainless Steel (SILVER) or Satin Black Powder Coat steel 

Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Compatible with the stock skid plate and most aftermarket skid plates

Choose between:

• Full set (Upper and lower crash bars)
• Upper crash bars only (Lower crash bar can be added later to complete full set)
• Lower crash bars only (Upper crash bar can be added to complete full set)

Product weights:

• Yamaha Tenere 700 SRC Crash Bars (Lower): 7.6 LBS 
• Yamaha Tenere 700 SRC Crash Bars (Upper): 14.8 LBS

Installation instructions  Full set and video

Installation Upper Set

Installation instructions lower bar set

Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars.  This is not rust and is perfectly normal.Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow. Standard protection version. We also offer an upgraded V2 version with left and right wing extensions that provide added protection for the waterpump and hoses on the right side and the ignition cover on the left side.  It's available here on the website. 

Fits Yamaha Ténéré 700 years 2022-2024 (and all Euro 5 exhaust models)

This skid plate is compatible with SRC lower crash bars. 

Protect your  T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed aluminum steel or satin black powder-coat aluminum

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700 added cutouts for more airflow and this V2 version offers left and right wing extensions compared to our standard model. The wings are visible in the photos and provide extra protection for the left side ignition cover and the right side water pipe and hoses. 

PLEASE NOTE! This skid plate is not compatible with most lower crash bars, including SRC lower crash bars. That being said, the wing extensions do a good job of protecting the lower portions of the engine though. 

Fits Yamaha Ténéré 700 years 2022-2024  and all Euro 5 exhaust models

Protect your  T7's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for the removal of skid plate

Available in natural brushed aluminum or Satin black powder coat made of a burly 4mm thick aluminum alloy. 

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

SRC Designs Protective Aluminum Skid Plate/Lower Engine Sump Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2019 - 2021*

Does not fit 2022-2023 or models equipped with E5 catalytic converter

Protect your  Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.  

• Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware. 
• Developed for on and off-road use
• Cutouts allow access to common service points without the need for removal of skid plate

Available in brushed stainless steel or satin black powder-coat

A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.

Installation instructions and video 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Save $168 on these closeouts! 

These are made by the same company that makes the AS skid plate,  THye are from Europe, we gave them a try, but the importing cost was crazy, so we are closing them out.  Nice quality! 

4 mm thick aluminum is substantially lighter than steel plates for deep off-road excursions. Only 5 lbs.

Quality hardware--not the soft fasteners that come with some other brands.

Replaceable nylon slider protectors.

Electrostatic powder painted for maximum durability, corrosion resistance, and color longevity. 

Product install instructions

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

HEX DESIGN is on CLOSEOUT

SRC Designs Head Light Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2021

Available in Brushed Stainless Steel finish or Satin Black Powder coat steel 

• Pin Mounting allows for quick tool-less removal for cleaning of the headlight lens 
• Developed for on or off-road use

Includes all necessary mounting hardware and is easily installed with common hand tools. 

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel. 

• Crafted out of 2 mm thick aircraft fuselage grade stainless steel
• Laser-cut, CNC bent on state-of-the-art machines
  
• Easy 5-minute install using the stock fasteners and common hand tools
• Available in natural silver stainless finish or black powder-coated

Product installation information can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE

SRC Designs Rear Brake Master Cylinder Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Available in brushed stainless steel or satin black powder coat finish. 

Product installation instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

The Rally Pro X-Strong is a durable injection-molded Nylon composite handguard that features an anodized aluminum bar for ultimate protection. It includes an indexed steel bar-end insert that mounts solidly and will not allow the guard to rotate in a crash. The included X-Strong mount kit allows the protection to be mounted to the handlebar with plenty of room for cables and brake lines. Optional spoilers are sold separately.

This is a universal part that fits most adventure motorcycles: Please note that some models with adjustable windscreens may need to have the windscreen in the forward-most location, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

PLEASE NOTE: Some OEM bars will require the removal of weighted bar ends and possibly other minor modifications to install handguards.  

For example- 

Choose from black, white or red colors.

View product instructions here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.