Regular price
$276.00
Sale price
$218.00
Save $58.00
SRC Designs Cargo Tail Rack for Yamaha Ténéré 700
OVERSTOCK SALE!
The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. This rack also includes stainless steel support brackets and is rated for up to 22 lbs (10 Kg) of gear.
Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1 top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics.
This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.
Pre-drilled for our 3L fuel can mount
Available in Satin Black powder coat
Fitment:
Yamaha Ténéré 700 years 2020 - 2024*
Black powder-coated 3.25mm aluminium top plate
25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution. Plus acts as much much-needed grab handle!
Fits to 4 x existing mounting points on rear of bike
Supplied with 4 x stainless steel standoffs to replace existing OEM units
Includes all stainless steel mounting bolts & counter-sunk washers
Flat section of the rack sits approximately 10mm above the passenger seat (standard OEM seat)
Slotted all around to cater for plenty of tie-down points
Pre-drilled to fit SRC 3 liter plastic fuel tank
Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
SRC DESIGN Cargo Racks* are made of lightweight strong 3mm aluminum alloy plate for an optimal balance of strength to weight. CAD designed and manufactured for a sleek and precise fit to match the rear profile of your bike and provide generous surface footprint with an abundance of attachment points for hooks, straps, and packs.
Available in Satin Black powder coat or Clear anodized natural silver to prevent oxidation.
Please note: Accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Case shown in the images is not included with this product but is available as well. If this is needed, please see this add-on product on our site: "Quick-release mounts"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Tail Rack for BMW F 750 GS/F 850 GS (D)
B-F750GS-04-01-AL (D)
Regular price
$168.00
Sale price
$78.00
Save $90.00
Rear Cargo Tail Rack for BMW F 750 GS/F 850 GS
Fits 2019-2024 models
Clear anodized natural silver to prevent oxidation
NOTE: Photos shown with this product include the custom quick attachment kit hardware (and box) for use with Kappa, GIVI, MONOKEY Hard Cases. This kit isNOTincluded with this product but is available as an add-on product.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Rear Cargo Tail Rack for BMW R 1200 GS / 2013-2018 #E-01-170#
B-R1200GS-04-01-AL
Regular price
$194.00
Sale price
$88.00
Save $106.00
CLOSEOUT SALE!
TOP CARGO RACK FOR BMW R 1200 GS 2013 - 2018
Available in satin black powder coat or clear anodized natural silver to prevent oxidation
NOTE: Some photos shown with this product include the custom quick attachment kit hardware (and box) for use with Kappa, GIVI, MONOKEY Hard Cases. This kit isNOTincluded with this product but is available as an add-on product.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Cargo Tail Rack Ducati Desert X
D-DSX-04-01
Regular price
$232.00
Save $-232.00
Fits: DUCATI Desert X 2022 - 2023
Made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords. 22 lbs / 10 Kg load capacity
Available in satin black powder coat or clear anodized natural silver to prevent oxidation
NOTE: These designs do not support Givi, KAPPA type boxes (Drilling holes would be needed, and add-on hardware purchased
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side rack / Mounting Bracket for Fuel/Jerry Can for Honda Trail CT125
H-CT125-27-02
Regular price
$88.00
Sale price
$62.00
Save $26.00
OVERSTOCK SALE!
Fuel/Jerry Can Mounting Bracket kit for Honda Trail CT125
Fits: 2023-2025 Honda Trail CT125
Add up to another 100 miles range on your Trail CT125 with SRC Auxiliary fuel can mounts. Pre-drilled for easy installation of our 3L fuel cans with mounts, available on our site.
Rugged 2 mm thick powder-coated steel brackets have mid and upper support points to provide years of safe and secure service.
**NOTE: The base plate is large enough to accommodate the ROTOPAX 2-1/2" mounting plate bolt pattern but you'll need to drill them yourself.
**The full bracket with Fuel/Jerry Can kits are also available on our site.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Mid Cargo Rack - HONDA Trail CT125
H-CT125-35-02
Regular price
$102.00
Save $-102.00
Fits 2023-2024 HONDA Trail CT125
Trick lightweight aluminum cargo rack in satin black powder coat with top-quality stainless hardware for your Trail CT125!
No drilling or modifications required, easily mounts in under an hour with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
If you are having difficulty locating an item please email us at info@srcmoto.com or call (503) 830-6433 during regular business hours, M-F 8-5 Pacific Time.