Crash Bars / Engine Guards Royal Enfield Himalayan

Heavy-duty satin black powder-coated 3mm (1/8") thick steel skid plate for the mighty Royal Enfield Himalayan!  (fits 2017-2022)  Replace the original pop can plate with this burly rock crusher for a lifetime of protection of the sensitive undercarriage of your Himalayan.  Easily installed in about an hour with common hand tools and no modifications required. Installs using the stock skid plate mounting points. 

Compatible with our SRC Crash bars . (We have gotten customer feedback that the Delkevic exhaust system and Zana crash bars are not compatible with the skid plate. )  The satin black powder coat can be easily touched up with readily available satin black spray paint if you happen to scratch it while gallivanting through the outback! 

Original design by Jessie Kimball of the Royal Enfield Himalayan owners group, Jessie was nice enough to provide us with rights to produce and sell his very clean and robust design. Thanks Jessie! 

 Below is a step by step installation video. (The skid plate install is about 3/4 of the way through the video). 

The 2016-2021 headlight guards are on an overstock discount

Your HIMALAYAN comes with a beautiful classic 7" round H4 halogen headlight that actually puts out a decent swath of light!  Protect it from road debris impact damage with the SRC Designs Headlamp guard kit.

Available in your choice of satin black powder coat laser cut 14 gauge steel or natural brushed stainless steel finish.   

The SRC headlight guard provides a proper defense against rocks, limbs, and other debris you might encounter on your adventures!  

All mounting hardware is included and the guard is easily installed in about 10 minutes with common hand tools. The trick pin mount system allows for quick removal for cleaning with no tools! 

Easily installed in just a few minutes with a Phillips screwdriver. 

PLEASE NOTE: If you are running the windscreen in the upright position, you can install the headlight guard in that position, but it will be tilted forward a bit at the top. To keep it square to the headlight, you will have to make a slight modification to the windscreen to expose the lower mounting hole.  (use a round file to remove enough material to allow the rearmost headlight guard mounting bolts to be installed.)

Product instructions located here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SPECIAL for 2017-2021 Himalayan tail racks LIMITED to STOCK on HAND This is the top rack plate that bolts to the stock tail rack. 

The newly designed 2022-2023 kit fits the Himalayan and the SCRAM 411 and features an all-new beefy 1" diameter frame structure that completely eliminates the failure-prone stock rack frame.  It also incorporates small side wings (approximately 6" tall by 10" long) to help keep soft luggage out of the tire/wheel area.  The new 2022-2023 rack kit is not compatible with the Royal Enfield Pannier Racks. 

Top rack is made of a strong 3mm aluminum alloy plate for an optimal balance of strength to weight.

Rack plate dimensions:

Approximately 10" long, 11" wide at the front, tapering to 8" at the rear.  

Available in satin black powder coat or clear anodized natural silver to prevent oxidation. Designed for use with the stock rear tail rack and is also compatible with the Royal Enfield accessory side Pannier rack.  

NOTE: The accessory quick attachment kit for use with Kappa, GIVI, MONOKEY Hard Cases (and shown in the images) is No longer available

Product instructions are available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

OVERSTOCK SALE! 

SRC DESIGNS GPS bracket bar for the ROYAL ENFIELD HIMALAYAN

2016-2021 or 2022+-2023 models available in black and silver 

2022-2023 part is compatible with Tripper Gauge 

The SRC DESIGNS GPS bracket bar gives you a solid attachment point on your Royal Enfield Himalayan windscreen mount. Gone are the days of trying to read shaky GPS screens. Made of stainless steel and anodized aluminum, this GPS bar is built to go the distance.

The GPS mount adapter provides a sturdy 22mm (7/8" inch) diameter mounting bar that is intended for mounting most GPS mounts. It can also be used for roadbook holders or any other device that uses a  common 7/8" clamp.

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Fits 2016 to 2023 Royal Enfield Himalayan and SCRAM 411  models

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Available in brushed stainless steel or satin black powder coat finish. 

Product instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.