Full kit install PDF 

Protect your Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated skid plate for HONDA's all-new Transalp XR750. 

Fits 2023-2025 Models 

Here is why you need to install protection now!   That is

the 

oil pan 

and exhaust in the red circle in the pic below.

 

 

 

 

 

 

 

Upper Crash Bars installation:  Printed Version 

Lower Crash Bar & skidplate installation:  Printed Version 

The integrated design is lighter (just under 24 lbs) and stronger than conventional two piece designs. 

• Full crash bars plus 4mm thick integrated aluminum skid plate - sold as a set

• Made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender

• Skid plate and crash bar design allows for oil change and filter replacement without removal and is compatible with the OEM and aftermarket center stands. 

• Crash bars also incorporate a 4mm (3/16") stainless steel skid plate to protect the vulnerable cast aluminum oil pan which hangs dangerously below the engine and is pretty much the lowest part of the bike!

• 4 x Main mounting points on each side of the bike for maximum strength

• Beautiful hand-laid TIG welds! 

• Available in black powder-coated and electropolished satin silver stainless steel

• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are 

• easily replaced if they are damaged in a tip-over

• Supplied with all stainless steel brackets & mounting hardware

• Easy to assemble, convenient and fast.

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Lower Crash Bar with integrated Skip Plate 2023-2025 Honda TRANSALP

We also have the full set (skid plate with lower and upper crash bars) available here.

Protect your Honda Transalp's vulnerable underside including the exhaust, oil cooler and oil pan, side cases, etc with SRC's heavy-duty crash bars with integrated skid plate for HONDA's all-new Transalp XR750.  

Lower Crash Bar & skidplate installation:  Printed Version 

The integrated design is lighter (just under 14 lbs) and stronger than conventional two-piece designs. 

• Low crash bars plus integrated skid plate - sold as a set

• Crash bars made from 1 "diameter steel tube with 2mm wall thickness. Laser cut and formed on a CNC tube bender

• Skid plate and crash bar design allows for oil change and filter replacement without removal. 

• Crash bars also incorporate a 4mm (3/16") aluminum skid plate to protect the vulnerable cast aluminum oil pan which hangs dangerously below the engine and is pretty much the lowest part of the bike!

• 4 x Main mounting points on each side of the bike for maximum strength

• Beautiful hand-laid TIG welds! 

• Available in black powder-coated and electropolished satin silver stainless steel

• The sacrificial plastic crash bar pads protect the crash bar and reduce impact from falling. They are easily replaced if they are damaged in a tip-over

• Supplied with all stainless steel brackets & mounting hardware

• Easy to assemble, convenient and fast. 

*Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Rear Cargo Tail Rack HONDA TRANSALP

Fits 2023-2025 HONDA TRANSALP

Trick lightweight aluminum tail rack in silver brushed aluminum or satin black powder coat with top-quality stainless hardware for your HONDA TRANSALP.

No drilling or modifications required, easily mounts in under an hour with common hand tools. 

Installation instructions  PDF

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 HEADLIGHT GUARD FOR 2023-2024*  HONDA TRANSALP

Waiting to test fit on the new 2025 headlight. 

The TRANSALP headlight is over $600 and 1 errant chunk of gravel cold be the end of it!  
...............................................................................................
1. The Headlight Guard is Laser cut from 2 mm thick Stainless Steel
2. Compatible hardware and Bracketry for ease of fitment and mounting
3. Easy to remove the Head Light Guard from the Grommet mounts for cleaning the headlight
4. Quick, easy and Do-it-Yourself fitment and Mounting
5. Fits 2023- 2024  HONDA TRANS ALP

Product Instructions  PDF 

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Made specifically for 2023-2024 Honda TRANSALP

• Keeps your side stand from sinking into soft ground & hot pavement! 
• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.  

• Easily installed in just a few minutes with common hand tools. 
• Made in high-quality Stainless Steel for long life
• Laser-cut stainless steel with Inox hardware

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

GPS Phone BAR FOR 2024 HONDA TRANSALP & HONDA NX500

Fits:

2023-2025  HONDA TRANSALP

2024-2025  HONDA NX500
...............................................................................................
1. Includes the mounting brackets made from 2 mm Stainless Steel sheet for improved Corrosion resistance properties and Laser cut and CNC Bent on State-of-the-art machines
2. The GPS Bar, is made out of Stainless Steel Bar stock 22mm diameter 97/8") with Welded End Adaptors and Compatible Hardware
3. The Surface is Electro polished to improve its aesthetic appearance and removal of scratches
4. Quick, easy and Do it Yourself fitment and Mounting Instructions can be accessed and downloaded from SRC Web site
5. Fits all HONDA TRANSALP's & HONDA NX500's

Our kit includes  DoubleTakes full adapter kit to allow fitment to all adventure bikes. 

• This kit fits almost any motorcycle make and model - Each pair comes with a Universal Adapter Kit which includes two 10 x 1.25mm Extensions, two 10 x 1.5mm BMW adapters, and one Reverse-Thread Adapter. 

• Here is a quick list:
• HONDA: 250L, Rally, CB500X, NC750, Africa Twins
• KAWASAK: 300X Versys, Versys 650, Versys 1000
• KTM: All adventure models
• SUZUKI: V-Strom 650, V-Strom 1000
• TRIUMPH: Tigers
• Royal Enfield: Himalayan
  
• DUCATI: Multistrada
• BETA: 500RR-S
• BMW: 310 GS, 310 R, 800 GS, 1200 GS, 1200 GS
• YAMAHA: FJ-09, Tenere 700
• And many more!

Over the years we have tried many popular Adventure bike mirror options and always come back to the simple and durable DoubleTake ADV sets as they simply work and provide an excellent field of view with minimal vibration distortion.  We feel this is the most important feature, functionality over form. There are a bunch of small/minimalist options to choose from on the web if you're into that, but safety and visibility are most important to us and that's why we run the DOUBLETAKE ADVENTURE mirrors on all of our bikes. 

Kit includes:  2 mirrors, 2 - 6" RAM Arms, 2 - 1" RAM Ball mounts, and thread adapters for your bike if needed, a small tube of Loctite thread locker (SRC exclusive!) Apply thread locker to adapter and ball mount threads to prevent your mirrors from vibrating loose.  Everything you need to install them in just a few minutes on most bikes!  

Install Tip: We recommend using one of the extension arms tightly clamped onto the ball mount to tighten the ball mount (and adapters if needed) into the mirror mounts of your bike.  

PS- If you are price shopping, please note that we include the correct adapters and spacers for the specific models below as well as Loctite thread locker to keep them from vibrating loose! 

Below is the DoubleTake Mirror inventors story of how the DoubleTakes came to be-

This mirror is the product of much frustration- I spent years breaking other designs and wondering what was going on behind me on the road. Eventually, when I dropped my bike and found myself buying two(!) new master cylinders as a result, I decided it was time to make a really good mirror, one that would function well as a mirror, and also protect the bike (and me) from damage. I had three goals for my design: That it work as well as an OEM mirror for seeing what was going on behind. That it would be indestructible. It would have to give way in a crash to avoid damage not only to the mirror, but also to the bike. That it could fold completely out of the way, so that when I am offroad, I don't have to think about it. Many experiments later, the mirrors for sale here is the result. Both models hit all three marks right on the nose. We use SAE spec glass to give maximum visibility (it can be important to distinguish Crown Victoria headlights from other vehicles!), it is made right here in Colorado Springs from a super tough nylon that we are so certain will survive we offer a lifetime warranty (on the housing, not the glass, but you can buy the glass separately), and sure enough, it folds right down when you want it gone. If you're deciding between the Adventure model, and the Enduro, our advice is simple. If you plan to fold the mirror down a large percentage of the time, the Enduro is right for you. The long size means the head of the mirror tucks away right behind the headlight. If the mirror will more or less remain extended, get the Adventure- the more compact design is more stable at highway speeds. Either way, you can't go wrong.

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

# double take

CLOSEOUT SALE

The NEW OS-BASE is the latest addition to the range. An innovative modular pannier system that fits virtually any trail, enduro or dual sport bike without the need for metal pannier frames.

The OS-BASE is an over the seat harness' which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as panniers.

The modular design enables you to modify your luggage set-up to suit your ride - from a day’s single track to longer adventure trips.

By adding an additional OS-ADVENTURE PACK as a top bag, you have a possible 100% waterproof, highly durable carrying capacity of up to 54 liters.

The flexible design of the OS-BASE also enables you to mount earlier model Overlander 15 packs as panniers, US-DRYPACKS as top bags and includes ‘Loop Mounts' to attach a tent or sleeping mat.

After the initial set-up, it’s quick and easy to put on and take off and the heavy-duty hypalon construction with a semi-rigid polypropylene core is very stable and lightweight.

The unique OS-RACK LOOP mounting system,* provides a very tough and reliable solution to the demands of off-road luggage carrying. 

*Includes 2 x OS-RACK LOOPS which require 2 x 6mm holes drilled in the rear fender for fitting.

FEATURES

• Carrying capacity from 12 to 54 Litres with center pack mounting option.
• Heavy-duty Hypalon™ construction.
• Quick & easy to put on/take off.
• Reinforced stitching on all stress points.
• Aircraft grade alloy hooks.
• Non-slip cam buckles.
• 2 x OS-RACK LOOPS included.
• 10 YEAR GUARANTEE

FITTING OPTIONS

Once the OS-RACK LOOPS are mounted on the rear fender and the OS PACKS of your choice are mounted to the BASE, fitting is quick and easy.

1. Hook-on the two top straps to the OS Rack Loops but leave loose.

2. Loop the two lower straps around the bike frame at the lowest possible position and hook them back to the loops on the strap making them as tight as possible.

3. Stand at the rear of the bike and pull the top straps as tight as possible, taking up the slack until the packs fit tightly to the bike.

4. Hook-on an additional top pack to the Loop Mounts on the OS-BASE and the OS-Rack Loops.

IMPORTANT If the OS-BASE is in contact with the exhaust silencer you must fit a heat shield.

DIMENSIONS
510(L) x 190(w) mm
20(L) x 7.5(w) ins.

WEIGHT
700g - 24.7oz

OS-BOTTLE 

• • Ultra-tough Hypalon construction
  • Draw-string and compression strap retainer
  • Aircraft grade alloy buckles
  • Heavy-duty Acetal cam buckles
  • 10 YEAR GUARANTEE

TECH SPECS

DIMENSIONS

• 250(h) x 180(w) x 60(d) mm
• 8.2(h) x 6(w) x 2.3(d) ins.

WEIGHT: 375g - 13.2 oz

KRIEGA LUGGAGE CAM STRAPS

A set of 2 Heavy-duty nylon Cam straps (5ft long) idea for attaching roll-top bags, tents etc.

Moulded Acetal buckles with ultra-aggressive grip-spikes on cam for non-slip web, even with heavy loads and wet straps.

1.5M  (5ft) long, high quality 1" webbing

Low weight - 1.7oz / 50g per strap

WEIGHT: 3.5oz - 100g

Kriega OS-Rack loops

OS-STRAPS (pair)

Kriega OS-Straps

Strap set to transform a pair of OS-32 panniers into traditional throw-over saddlebags. Constructed using aircraft grade alloy components and abrasion-resistant Hypalon.

Features:

• Aluminum end hooks
• Nylon strapping
• Hypalon anti-marring tabs
• Sold as a pair

CLOSE OUT

OS-PLATFORM 16-20MM TUBE FIT (sold individually)

TUBE FIT - all 16 - 20mm standard hoop pannier frames including ROYAL ENFIELD, TOURATECH, HEPCO & BECKER, GIVI, KTM, RALLYRAID PRODUCTS, SHIFT MANUFACTURING & METAL MULE 

Virtually indestructible Nylon-6 Platform, lighter than alloy and without fatigue issues machined with optional attachment points enabling you to set-up the bike to suit your adventure.  Compatible with OS and US KRIEGA bags as well as most others on the market.

FEATURES

• 10mm NYLON-6 construction.
• CNC machined.
• Includes fitting kit for 16mm - 20mm hoop frames.
• Universal design, fits left or right side.

PLATFORM DIMENSIONS
390(w) x 300(h) x 10(d)mm
15.3"(w) x 11.8"(h) x 0.3"(d)

TOTAL WEIGHT
1200g  / 42oz

 SOLD INDIVIDUALLY 

Pre Drilled for ROTOPAX mounts

• Mount a single OS-SOFT PANNIER or a single 1.75 Rotopax™ fuel or water container.

• Mount a OS-6 or OS-12 ADVENTURE PACK with single or double 1-gallon Rotopax™ fuel/water containers.

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

OS-12 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-12 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks  
  
• Mount to an OS-BASE as a side pannier or tail pack
  
• Mount as a tail pack with Kriega OS RACK LOOPS
  
• Hook on to an OS-32 pannier (front, rear or top)
• Mount directly to most front crash bars     
• Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

 An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

• 360(h) x 200(w) x 160(d) mm
• 14.2(h) x 7.9(w) x 6.3(d) ins.

CAPACITY: 12 Litres -732 cu in

WEIGHT: 850g - 30 oz

OS-SHOULDER STRAP (sold each)

Convert your OS-ADVENTURE PACK or OS-32 /22 /18 SOFT PANNIER into a shoulder bag for easy carrying off the bike.

• Fits OS-6, OS-12, OS-18 , OS022 & OS-32 PACKS
• Length adjustable
• Ultra-tough HYPALON™ shoulder pad
• Aircraft-grade alloy buckles

WEIGHT: 100g

OS-6 ADVENTURE PACK is specifically designed for riding in the most demanding of environments. Use as a single stand-alone pack or as a multi-pack storage system with the addition of other packs in the OS range.

The 100% waterproof roll-top closure (removable white liner) guarantees pack contents remain protected from the elements.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon™+ 1000D Cordura® and aircraft grade alloy hooks.

A semi-rigid SureGrip rubberized base with integrated hook loops and straps enables the pack to be mounted directly to most popular racks and pannier frames. Alternatively, it can be mounted in various ways using the alloy hooks with other Kriega loop systems, making the OS-6 a very versatile pack.

FEATURES

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Aircraft-grade alloy buckles
• Heavy-duty Acetal cam buckles
• Hi-Vis details
• Shoulder strap loops

MOUNTING OPTIONS

The four Integrated loops on the base of each pack are designed to:

• Mount directly to most rear racks  
  
• Mount to an OS-BASE as a side pannier or tail pack
  
• Mount as a tail pack with Kriega OS RACK LOOPS
  
• Hook on to an OS-32 pannier (front, rear or top)
• Mount directly to most front crash bars     
• Mount as a tank bag with Kriega TANK or SUBFRAME LOOPS

 An optional OS-SHOULDER STRAP can be hooked on to convert to a shoulder bag. (sold separately)

TECH SPEC

DIMENSIONS

• 320(h) x 200(w) x 90(d) mm
• 12.5(h) x 7.9(w) x 3.5(d) ins.

CAPACITY: 6 Litres - 366 cu in

WEIGHT: 550g - 19.4 oz

CLOSEOUT SALE! 
Kriega Overlander-S OS22 Drypack

DIMENSIONS
400(h) x 420(w) x 150(d) mm
15.7”(h) x 16.5”(w) x 5.9”(d)

(sold each, rigid platform mounts shown sold separately)

The OS-22 Soft Pannier has all the same design features as the OS-32 soft pannier except for a 40mm slimmer profile. Designed to pair up with an OS-32 for bikes with off-centre pannier frames or to be used as a pair of OS-22s if you just desire a narrow profile to your bike.

The structured box shape allows for effortless packing and load control. The 100% waterproof roll-top closure and removable white liner guarantee pack contents remain protected from the elements.

Mounting and dismounting OS-SOFT PANNIERS to the bike takes less than a minute with two quick-release straps and buckles. The same straps compress the pack firmly in position. No extra tie-down straps are required.

Constructed from the highest quality materials including ultra-abrasion resistant Hypalon + 1000D Cordura®, with Kevlar® webbing and aircraft grade alloy buckles.

Offering two easy fit options, either traditional 'over the seat' saddlebag format using OS STRAPS or as a single pannier by hooking-on to a specially designed OS Platform base. 
(both sold separately and available here on our site)

FEATURES

The OS-22 is the base for various add-on options with 16 “hook-on” points. Choose either 6 or 12 litre OS-PACKS to mount on the top and/or front or back, to build up a bespoke luggage system to suit your type or trip length.

A reinforced handle assists carrying heavy loads off the bike. Plus an optional  OS Shoulder Strap can be hooked on to convert to a shoulder bag.

A security cable block provides a solid mounting point to cable-lock the pack to the bike frame to stop the opportunist thief.

Hi-Vis details front and rear add an extra safety element for low light riding.

 TECH-SPECS

• 100% waterproof liner
• Roll-top closure
• HYPALON™+ 1000D Cordura®
• Reinforced carry handle
• Aircraft grade alloy buckles
• KEVLAR® webbing
• Security cable block
• Hi-Vis details
• 16 hook-on points
• Shoulder strap loops

WEIGHT
2600g - 91.7oz

VOLUME
22 litres (1340cu in)

FITTING OPTIONS

The OS-22 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-22
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-22 to the platform. Available here on our website. 

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

CLOSEOUT SALE! 

Kriega Overlander-S OS32 Drypack

Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)

(sold each, rigid platform mounts shown sold separately)

The Overlander-S series of roll-top, 100% waterproof bags feature semi-rigid walls for easy loading and shape retention. The OS-32 bags are intended as foundation saddlebags that readily accept the smaller bags within the series as modular tethers of supplemental storage. All OS-PACKS are 100% waterproof and constructed from ultra-abrasion resistant Hypalon and 1000D Cordura nylon that is ready to deal with the toughest of adventures.

Features:

• 100% waterproof construction
• Semi-rigid wall panels retain shape when empty
• Ultra-abrasion resistant Hypalon strapping
• 1000D Cordura nylon body construction
• 32 liter capacity ea.
• Dimensions: 400mm H x 420mm W x 190mm D (15.7" H x 16.5" W x 7.5" D)
• Sold each

DIMENSIONS
380(h) x 250(w) x 190(d) mm
14.9(h) x 9.8(w) x 7.5(d) ins.

CAPACITY
18 Litres -1100 cu in

WEIGHT
1000g - 35oz

FITTING OPTIONS

The OS-32 requires pannier frames to be fitted to the bike. 
These are model specific, available as accessories from bike manufacturers or other aftermarket suppliers. 

Once fitted there are 2 options to fit the OS-32
1. Traditional ‘over the seat’ saddlebag format, using OS-STRAPS
2. Fixing a specially designed OS-PLATFORM to the frame and mounting the OS-32 to the platform. Available here on our website. 

OS-32 SOFT PANNIERS FITTING USING OS-STRAPS from Kriega on Vimeo.

OS-32 SOFT PANNIER FITTING USING OS-PLATFORM from Kriega on Vimeo.

CLOSEOUT SALE!

THE VERSATILE ‘ACTIVE’ PACK FOR ROAD AND TRAIL

We love our R20's, they have a nice body-hugging contoured design that looks sharp and feel great. And the Quad-Loc harness system does a great job of distributing the load taking the stress off your shoulders that is so common on conventional backpack designs. It's the perfect size for day trips or for an extra 20L of storage on your longer adventures.  Although KRIEGA doesn't describe it as waterproof, we've never had any issues of our gear getting wet while riding in the rainy winters up here in the NW.   

The Kriega R20 motorcycle backpack is an ‘active’ riding pack with Kriega's unique QUADLOC-lite harness system. The harness is angled away from underarms for total freedom of movement and is exceptionally easy to use with none of the harness re-adjustment necessary on conventional riding/hiking packs.

The size adjustable harness allows the backpack position to be moved up or down to produce the best possible fit. The Kriega R20 can be worn with or without a waist strap. The waist strap is not really necessary for street riding

FEATURES  

The R20 incorporates a side pocket with water-resistant YKK® zip, along with an inner sleeve pocket and a key clip in the large main compartment. The pack is compatible with a CE-Level 2 back protector and hydration reservoir.

Designed and built with the highest quality materials, only Kriega offers an ergonomically perfect luggage solution that’s simple to use even in the thickest gloves, yet fully customizable to suit the most demanding of motorcyclists. 

TECH-SPECS

• Main compartment with YKK water-resistant zip
• Side access pocket with YKK water-resistant zip
• Internal hydration sleeve with compression
• Internal zipped mesh-pocket
• SUPERSPACE: 5mm airspace back.
• YKK water-resistant zips
• HYPALON: Abrasion resistant re-enforcement
• Scholler Dynatech With integrated 3M Scotchlite
• 420 D nylon RipStop: lightweight yet extremely strong
• 3M Scotchlite: reflective logo
• Unique QUADLOC harness: adjustable back length and total arm freedom
• Side access pocket
• Optional Kriega 3 Liter Hydrapak + Tube available (sold separately)
• Optional add on 5 or 10-liter drypacks
• Optional harness pocket
• Removable waist strap
• 10 year guarantee
• 20-liter capacity
• 470mm H x 280mm W x 150mm D (18.5" H x 11" W x 5.9" D)

WEIGHT
2.5 lbs  / 1150 Grams 

OVERSTOCK SALE!

ROAM TOOL ROLL

CLOSEOUT SALE!

ROAM HANDLEBAR BAG

FEATURES

Pack

100% waterproof bolt-on waterproof fender pack made from 1000D Cordura. 2.5L (150 cu in) capacity – ideal for safety equipment, small tools, dry gloves, etc. Innovative ‘flush’ alloy fasteners included (see fitting).

Base

Ultra-tough Rhinotek fabric on base with 4 x heavy-duty rivets. All fasteners for dirtbike fender are included (see fitting). Pack also has a removable(hook and loop) waterproof liner for cleaning or replacement.

Fitting

Remove the white liner (hook and loop, top edge) and remove the bag from the packaging. Included with the Rally pack are 4 x alloy/stainless fasteners with nylon spacer washers. The product packaging is designed to used as a drilling guide.

Line up the guide on the rear fender and drill 4 x 6mm diameter holes. Use the optional nylon washers to ensure that the threaded fastener is below the top surface of the alloy fastener (prevents damage to the internal waterproof liner/foam). Tighten anti-clockwise and always use thread lock. Allow 24 hours to dry.

TECH-SPECS

• 2.5-litre (150 cu in) capacity
• 100% waterproof
• Hook and loop closure strap
• 4 x CNC 6061-T6 alloy fasteners
• 4 x Stainless steel fasteners
• 1000D Cordura
• RHINOTEK: abrasion-resistant fabric
• DRY PACK: taped-seam liner
• 10-year guarantee

DIMENSIONS

• 200(h) x 175(w) x 70(d) mm
• 7.9(h) x 6.9(w) x 2.7(d) ins.

WEIGHT

• 300 Grams

TRAIL9 ADVENTURE BACKPACK

SUBFRAME LOOP STRAPS

Provides a strong hook-on location to mount OS-ADVENTURE PACKS or US-DRYPACKS to most types of bike.

Get an extra set so you can quickly move your US Drypacsk to another bike etc. 

Simply thread around the bike subframe and back through the buckle. 

4 x 500mm (20") lengths of webbing with loop and buckle at one end. 

NOTE: US 20 & 30 DRYPACKS include 4 x Subframe Loops in the fitting kit. 

WEIGHT
50g

Converts a Kriega US-Drypack to a Tank Bag, compatible with US-5, US-10 & US-20 Drypacks plus OS-6 & OS-12 Adventure Packs.

• Universal fit to most makes and types of bikes including bikes with metal and plastic tanks.

• Easy to fit with frame loops at the front and hook & loop pads under the seat at the rear.

• A scratch-resistant base fabric that holds the pack firmly in position and quick-release buckles give easy access to fuel filler.

• Now with Cordura® fabric construction

• Reflective logo print

• Heavy-duty Velcro® fixing

• 10 YEAR GUARANTEE

FEATURES

WEIGHT: 250g / 8.8oz

PRODUCT CODE: KUSTK

TRAIL18 ADVENTURE BACKPACK

Kriega US-20 Drypack (This is the new 420D Cordura version released in 2019)

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

The Kriega US-20 is an award-winning, high-quality piece of motorcycle luggage offering 20 liters of capacity. Like all Kriega US bags, it is a 100% waterproof drypack with an innovative design that attaches to the rear of a bike using included buckle loops and alloy hook straps. The Kriega US-20 motorcycle bag comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike. 

Anti-slip mesh base also doubles as a pocket to store the shoulder & waist straps or other items when the US-20 is attached to the motorcycle. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 x tuck-away buckles at the corners of the mesh-pocket.

The Kriega US-20 dry pack motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega dry bag US-20 tail pack utilizes the latest generation of fitting straps. US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat.

Kriega US-20 dry pack features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• 420D nylon ripstop - lightweight yet extremely strong
• 6061-T6 alloy fitting hooks
• Acetal ITW Airloc quick-release buckles
• YKK water-resistant zip on side pocket
• Side access zip pocket (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• US Alloy Hook Straps included
• 10-year guarantee
• 20-liter capacity     
• 15.7" H x 10.2" W x 7.5" D

Kriega US Alloy Hook Strap

The Kriega US Alloy Hook Strap is an individual replacement strap for 2012+ Kriega US-10, US-20 and US-30 packs.

Features:

• 1 x quick-release strap with alloy buckle
• Custom 6061-T6 CNC-milled aircraft grade alloy
• Easy on/off
• 600mm
• Does not include subframe loop

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

Kriega US-10 Drypack 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega's best-selling US-Drypack System has led the way for universal-fit, waterproof carrying on a motorcycle for over 15 years. Now the classic design has been further enhanced with the introduction of CORDURA® fabrics for the main body construction. With increased durability and abrasion resistance, the versatile US-Drypack System provides guaranteed all-weather protection for your gear on any type of motorcycle.

Kriega US-30 Drypack (This is the new 420D Cordura version released in 2019) 

Yeah, you can get cheaper bags, but you can't get better bags! :-)  We ended up with Kriegas after years of trying other bags on the market and we have never looked back. They are one of those purchases that you later never regret. Very satisfying high-performance stuff! 

Kriega US-30 Drypack

The Kriega US-30 is 30-liter capacity 100% waterproof motorcycle tailpack. This unique design solution can fit directly to the bike's subframe or mount solidly under the seat. The US-30 also comes equipped with removable shoulder and waist straps, so it can be carried courier style, on or off the bike.

Base anti-slip mesh also doubles as a pocket to store the shoulder and waist straps when the US-30 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

The Kriega US-30 motorcycle tailpack is designed to work perfectly with pretty much any motorcycle, via a super secure attachment to the sub-frame. The pack is easily attached/removed by 4 x quick-release buckles, and no extra bungees or rain covers are required. The Kriega US-30 tail pack utilizes the latest generation of fitting straps: US Alloy Hook Straps allow tailpack combinations of up to 70-liters to be carried with confidence and convenience. Easy on/off with no loose straps remaining. Custom aircraft grade, 6061-T6 alloy hooks attach to the four discreet web loops located on the sub-frame of the bike. Fitting method is particularly suitable for traditional one-piece motorcycle seats and bolt-on seat pads/racks, as well as standard seats. US packs can be mounted inline or across the seat. See US Alloy Hook Strap page for full fitting instructions.

Features:

• 100% waterproof main body
• 420D Cordura Lite construction
• HYPALON: abrasion resistant reinforcement
• DRYPACK: removable tape-seamed liner (white)
• Acetal ITW Airloc buckles
• YKK water-resistant zips
• 6061-T6 alloy fitting hooks
• Side access zip pocket  (water-resistant)
• Rear mesh pocket
• Shoulder & waist straps
• 1 x set US Alloy Hook Straps included
• 10-year guarantee
• 30-liter capacity 
• 445mm H x 295mm W x 225mm D (17.5" H x 11.6" W x 8.9" D)

OS-STRAPS (pair)

Kriega OS-Straps

Fit: Upgrade alloy hooks for (pre-2012) US-10 and US-20 tailpacks or replacement fitting set for US-10, US-20 & US-30 DRYPACKS.  

FEATURES

Hook: Upgrade alloy hook straps for older generation US-10 and 20 packs (standard on post 2012 product). Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.

Fitting: NB - Some bikes already have web loops attached to the seat-pad/base. In this case we still recommend the fitting of the Kriega loops, as fitting to the subframe is far stronger than to the seat.

Remove bike seat and locate the best mounting areas on the rear subframe. It may be necessary to slot the internal plastic tray if no subframe metalwork is exposed. Attach the 4x 20mm web loops securely to high strength areas of the frame. The 20mm loops are adjustable in length. Final adjustments should be carried out with the seat/pad fitted. Once set, the web must be threaded back through the adjuster to lock-off the webbing. See the threading diagram on this page. To fit the US-pack, hook on the web loop, attach the top quick-release buckle and cinch down the bag on to the bike. Always use the 2 x strap keepers on the web to manage the loose ends. Please also ensure that the quick-release buckles are correctly 'clicked'

TECH-SPECS

• Custom 6061-T6 alloy hooks
• Multi-position: inline or across bike seat
• Easy on/off bike
• No loose straps left on bike
• Std. strap length 600mm
• 4 x Acetal ITW Airloc buckles
• 4 x 20mm sub-frame loops
• 10-year guarantee

WEIGHT: 200.00 Grams

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

STEELCORE STRAPS

Love it • Lock It

Quality: Steelcore straps have a braided 7/19 galvanized steel cable at the center covered in a cut-resistant, heavy-weight webbing made of a proprietary blend of steel and fibers. The Straps have an aircraft grade aluminum buckle assembly that is powder coated for corrosion resistance. Our locks are custom-made using double butted key and pick-resistant design.

Innovation: Steelcore is committed to being on the cutting edge of innovation and product development. We will continue to explore opportunities to improve our products and create value for our customers.

The quick-adjust camera mount with 2-axis rotation to line up the perfect angle to capture your action shot!

Dango Designs Gripper Mount Features:

• Gripper jaws clamp to irregular shapes and slippery surfaces, such as your helmet, handlebars, or your vehicle.
• Slim yet durable construction allows the Gripper Mount to slip effortlessly into tight situations.
• Easily movable and serves as a quick-attach fixed mount, handheld stabilizer, or mini tripod.
• Flexible front web conforms to your object.
• Robust dual torsion spring provides strong clamping force.
•  2-axis rotation for flexible and quick adjustment to reposition your camera for that perfect shot.
• Compatible with ¼ in 20 mounted digital action cameras (adapter version only see below) (see adapter kit below) and all GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and Hero 6 Black.
• Mount for all Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included.

Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO

Dango Designs Gripper Mount Features Accessory Adapter Kit sold separately for $7.99 as described below: (recommended for use on most modern MOTO helmets to position the camera far enough away from the chin guard to allow for proper angle adjustment. See Daniels video below for a clear explanation) 

Increase your camera angle and mounting options with our new adapter pack for the multisport Gripper Mount from Dango Design! The Adapter Pack makes the Gripper Mount even more flexible. Fine-tune your camera’s position with the 20mm and 35mm extension arms.  Make your Gripper Mount compatible with digital action cameras using the ¼” – 20 adapter.

Add On Accessory Adapter Kit Features

• Compatible with Dango Design Gripper Mount and other action camera mounts
  • All GoPro® camera models: Hero2, Hero3, Hero4, Hero5, Hero5 Black, Hero5 Session, Hero Session and GoPro Hero 6 Black
• Makes the Dango Design Gripper Mount Compatible with ¼ in 20 mounted digital action cameras
• The Gripper Mount works for Powersports and action sports, including ATVs, motorcycles, bicycles, snowboarding, skiing, surfing, kayaking, motocross, and more!
• All hardware included

Hardware Included in add on accessory adapter kit*

• 20 mm Universal Extension Arm with Screw
• 35 mm Universal Extension Arm with Screw
• 1/4”-20 Universal Camera Adapter
• * Gripper Mount and GoPro camera not included

Here's an independent review of the Dango Gripper mount for GoPro by the popular YouTube Moto Vlogger Daniel Olszewski. He addresses the concerns we had when we first saw one of the mounts and does a really nice job of showing how versatile the Dango Gripper is.  You can check out more of Daniels work at his YouTube channel here: ReturnOfDeeO