Frame Guard (LEFT) - Yamaha Ténéré 700 (D)

CLOSEOUT SALE ! 

SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2025* 

2020-2021 full and lower kits are compatible with SRC skid plate.

*2022-2023 models, you can not use the SRC V2 skid plate and lower crash bars. 

PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine. 

Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022.  If you are unsure of how to order, shoot us an email for assistance. 

Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit

Available Electropolished Stainless Steel (SILVER) or Satin Black Powder Coat steel 

Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over

Compatible with the stock skid plate and most aftermarket skid plates

Choose between:

• Full set (Upper and lower crash bars)
• Upper crash bars only (Lower crash bar can be added later to complete full set)
• Lower crash bars only (Upper crash bar can be added to complete full set)

Product weights:

• Yamaha Tenere 700 SRC Crash Bars (Lower): 7.6 LBS 
• Yamaha Tenere 700 SRC Crash Bars (Upper): 14.8 LBS

Installation instructions  Full set and video

Installation Upper Set

Installation instructions lower bar set

Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”  Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars.  This is not rust and is perfectly normal.Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE

SRC Designs Rear Brake Master Cylinder Guard for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!  

• Constructed of 2mm thick 304 stainless steel for maximum protection! 
• Easily installed in just a couple of minutes to provide a lifetime of protection. 
• Available in brushed stainless steel or satin black powder coat finish. 

Product installation instructions available here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE!

SRC Designs Side stand/Kickstand foot enlarger for Yamaha Ténéré 700

Fits Yamaha Ténéré 700 years 2020 - 2025

Keeps your side stand from sinking into soft ground & hot pavement! 

• Don't find out the hard way why these are so popular! 
• Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!

The SRC large side stand base extension (doubles the surface area) installs easily and improves your parking experience when off pavement with your bike.

• Made of laser-cut stainless steel sheet 304 grade 3 mm thickness
• Stainless bolts and locknuts
• Easy installation

Product installation instructions can be found here

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.
However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

 SRC Designs Cargo Tail Rack for Yamaha Ténéré 700

CLOSEOUT SALE! 

The top plate is made of strong 3mm aluminum alloy plate for an optimal balance of strength to weight. Lots of openings for strapping and bungee cords.  This rack also includes stainless steel support brackets and is rated for up to 22 lbs  (10 Kg) of gear. 

Comparing this V2 HD tube frame rack with our V1 center rack, the center top rack of the V1 is good for small luggage set up and especially Kriega luggage, however, if you need access to the battery or electrics whilst on a ride you need to remove the rack which can be a little annoying and secondly the V1 rack fits over the passenger seat so no place for a passenger to sit. The full version of the V1  top rack with side racks is good for riders that have soft luggage as the side racks are slightly raised off the side with rubber stands offs so they stop potential damage caused by luggage rubbing on the plastics.

This new rear rack (V2) with grab rails is great as it allows access to the air filter & electrics etc. without need to remove the seat whilst out on a ride. The real benefit of V2 is using the grab rails to pick up the bike or lift the bike out of ruts & muddy holes etc...as T7 has nothing to hold onto at rear of bike. This V2 option allows for much larger luggage to be carried as racks sits further out off the back of bike. On a side note, the V2 version can also act as rear crash bars as they stick slightly out from the side of bike. We've tested all options and this also comes from reliable customer feedback.

Pre-drilled for our 3L fuel can mount

Available in Satin Black powder coat

Fitment:

• Yamaha Ténéré 700 years 2020 - 2024*
• • Black powder-coated 3.25mm aluminium top plate
    
  • 25mm (1") Chro-moly steel tube frame for increased load capacity and weight distribution.  Plus acts as much much-needed grab handle!
  • Fits to 4 x existing mounting points on rear of bike
  • Supplied with 4 x stainless steel standoffs to replace existing OEM units 
  • Includes all stainless steel mounting bolts & counter-sunk washers
  • Flat section of the rack sits  approximately 10mm above the passenger seat (standard OEM seat)
  • Slotted all around to cater for plenty of tie-down points
  • Pre-drilled to fit SRC 3 liter plastic fuel tank
  • Easy to drill holes to fit the Roto-Pax fuel/water containers in a position to suit you
  • Quick & easy fitment
    
  
  

Installation instructions and video

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged.

However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.

CLOSEOUT SALE! 

Fits: 2021-2025 Yamaha TÉNÉRÉ 700.

T700-2 will lower the rear 1 inch 

T700-3 will lower the rear 1.50 inches.

Reinforced for added strength/durability when adding weight.

Built in Boise, IDAHO. Ridden and raced everywhere.

Replaces Yamaha part # BW3-2217M-00-00

* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.