TACKFORM ENDURO The Tackform Enduro Motorcycle Mount is the ultimate phone mounting solution when looking to mount a smartphone on your Motorcycle, Dirt Bike, 4 Wheeler, Quad, Snowmobile, you name it. Made from high strength aluminum and designed to last a lifetime. This motorcycle mount will endure the roughest of terrain while keeping your phone seated securely in the phone cradle. You can easily place or remove the phone with a single hand. Your phone can be mounted in both landscape or portrait mode. The rock solid ball and socket joint allows you to swivel the phone to any desired viewing angle. If you like to go fast and want a mount that will outlast you, you've come to the right place.
Buy it now - Use it forever - Lifetime Guaranteed
COMPATIBILITY Works seamlessly with all cell phones and devices up to 3.4 inches wide and 5/8" thick. This includes all standard and Plus sized iPhones with or without a protective case. Samsung Galaxy, LG, HTC, you name this motorcycle phone mount will hold it.. Securely. The beauty of this mount is you're able to get any phone, with any phone case, in and out of the cradle with a single hand. Loaded with dual industrial spring creating a rock steady hold on your cell phone while allowing to easily get the phone in and out of the cradle with a single hand.
INSTALLATION Installation is a breeze - 2 Minute Installation The kit comes with 3 custom fittings for 7/8", 1" and 1-1/4" bars (Also, works with 1.31" over-sized road bike or mountain bike Bars.) And fits all SRC GPS Bars 1. Simply place the appropriate spacer over the bar. Connect the clamp with the included wrench and two screws. 2. Loosen the ball and socket joint and position the phone into the desired position. Lock into place. 3. From here you will be able to easily place and remove your phone from the mount with a single hand. Ride off into the sunset...
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Engine/Crash Bars - Yamaha Ténéré 700 (D)
Y-T7-V2-17-02-FL
Regular price
$688.00
Sale price
$348.00
Save $340.00
CLOSEOUT SALE !
SRC Designs Engine/Crash Bar Set for Yamaha Ténéré 700 2019 - 2025*
2020-2021 full and lower kits are compatible with SRC skid plate.
*2022-2023 models, you can not use the SRC V2 skid plate and lower crash bars.
PLEASE NOTE! The SRC lower crash bars as well as most others are not compatible with the SRC V2 skid plate. That being said, the SRC V2 skid plate wing extensions do a good job of protecting the lower portions of the engine.
Also, some international markets received the EURO 5 updates on the 2021 models (larger catalytic converter in the headpipe), North America models did not get this until 2022. If you are unsure of how to order, shoot us an email for assistance.
Stout 1" (25mm) steel tube with 1/8" (3mm ) wall thickness CNC Laser cut bracketry and mounts for a precise fit
Available Electropolished Stainless Steel (SILVER)or Satin Black Powder Coat steel
Includes sacrificial heavy-duty Delrin guards at critical impact zones that are easily replaced if they are damaged in a tip-over
Compatible with the stock skid plate and most aftermarket skid plates
Choose between:
Full set (Upper and lower crash bars)
Upper crash bars only (Lower crash bar can be added later to complete full set)
Lower crash bars only (Upper crash bar can be added to complete full set)
Replacement guard/crash bar pads can be found here A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness. These crashbars often contain brown colored blasting media particles found in the ends of the bars. This is not rust and is perfectly normal.Product installation instructions can be found here
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Regular price
$318.00
Sale price
$150.00
Save $168.00
Save $168 on these closeouts!
These are made by the same company that makes the AS skid plate, THye are from Europe, we gave them a try, but the importing cost was crazy, so we are closing them out. Nice quality!
4 mm thick aluminum is substantially lighter than steel plates for deep off-road excursions. Only 5 lbs.
Quality hardware--not the soft fasteners that come with some other brands.
Replaceable nylon slider protectors.
Electrostatic powder painted for maximum durability, corrosion resistance, and color longevity.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Does not fit 2022-2023 or models equipped with E5 catalytic converter
Protect your Tenere's vulnerable underside including the exhaust, oil cooler, side cases, etc with SRC's heavy-duty skid plate.
Made of heavy gauge 4mm thick aerospace fuselage aluminum sheet with stainless brackets and hardware.
Developed for on and off-road use
Cutouts allow access to common service points without the need for removal of skid plate
Available in brushed stainless steel or satin black powder-coat
A common question is “Can the skid plate and crash bars be installed together?”Yes, both parts include spacers that are used in the main mounting locations when the part is installed by itself. When adding the second part, the spacer is removed to allow room for the 2nd parts mounting bracket thickness.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Protect the vulnerable rear master cylinder from a catastrophic failure from a tip-over or impact by flying debris that could leave you without brakes!
Constructed of 2mm thick 304 stainless steel for maximum protection!
Easily installed in just a couple of minutes to provide a lifetime of protection.
Available in brushed stainless steel or satin black powder coat finish.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Frame Guard (LEFT) - Yamaha Ténéré 700 (D)
Y-T700-20-02
Regular price
$48.00
Sale price
$16.00
Save $32.00
CLOSEOUT SALE!
SRC Designs Frame Guard (Left side) for Yamaha Ténéré 700
Fits Yamaha Ténéré 700 years 2020 - 2025
Protect the header downpipe from rocks, road debris, and tip over impacts with this slick stainless steel guard laser cut from stainless steel.
Crafted out of 2 mm thick aircraft fuselage grade stainless steel
Laser-cut, CNC bent on state-of-the-art machines
Easy 5-minute install using the stock fasteners and common hand tools
Available in natural silver stainless finish or black powder-coated
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
