Please note, that we had quality problems with these in the past and discontinued them. We were recently contacted (October of 2024) by a new manufacturer and the quality is excellent. They are laser cut and machine formed, so the fit and finish is superior to what we had in the past.
If you are 5'8" or taller, you have probably noticed that the stock windscreen on the Rally is just a bit short and allows some wind buffeting to occur at cruising speeds.
Easily installed in just a couple of minutes using 5mm allen wrench.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
For some reason, the CRF 300L and Rally's have really tall seat heights(over 35" and taller than the AFRICA TWIN!?! ), especially for a small displacement beginners bike.
So we have some options to get your feet firmly on the ground. We are pleased to offer these custom-shaped lowering seats that lower the seat height by about 2". These are brand new original HONDA seatsthat have been hand shaped and re-formed to reduce the seat height by about 2" There is still 1-1/2" of foam cushion in the main seating area, so normal ADV riding won't be an issue, but if you are a hard-charging off-roader frequently getting airborne, it might be a bit firm on some landings! :-)
These were developed after my wife was about to give up on her Rally as it was too tall for her. She is relatively new to offroad riding and really felt unsafe and uncomfortable on the Rally, especially when riding on sidehills and slippery surfaces where she was not able to touch the ground when needed. We had already installed a lowering link and that helped, but she wanted it lower to feel comfortable. So we gave one of these a try and she now loves her Rally! Easily installed in just a couple of minutes with common hand tools.
We often get further questions from customers: Here is our general response-
The cons of running a link are due to the geometry change in the suspension. In a nutshell, the bike becomes "choppered out" slightly. So the bike likes to go straight (improves straight-line stability), but when cornering on loose surfaces such as gravel roads or lose dirt, the bikes front end will have a bit more of a tendency to plow or push through corners. This is not noticeable on pavement and a beginner off road rider probably won't push the limits of traction enough to have it be an issue, but if you are an experienced off-road rider, you will most likely notice it.
In regards to seat comfort, we had to choose a compromise point that had decent comfort and still an effective seat height reduction. If you read through the reviews, you will see a couple of comments about reduced comfort. I generally tell people that you most likely won't notice it riding off-road where you are standing up intermittently, but if you are riding a couple hundred miles of pavement, then its surely to be noticeable.
Lastly, to simulate the ride height adjustment, find some lumber, bricks or something that you can easily stack up on both sides of the bike that you can rest your feet on that is the same height as the potential drop from the seat and link. That will give you a pretty good sense of how it will feel after the mods.
* These are brand new original HONDA seats that have been hand-shaped and re-formed to reduce the seat height by 2"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowered Seat HONDA CRF 300L Rally (Red)
77200-K1T-E10ZA
Regular price
$368.00
Save $-368.00
Fits 2021-2024 300L RALLY
About 2" lower than stock seat
For some reason, the CRF 300L and Rally's have really tall seat heights(over 35" and taller than the AFRICA TWIN!?! ), especially for a small displacement beginner bike.
So we have some options to get your feet firmly on the ground. We are pleased to offer these custom-shaped lowering seats that lower the seat height by about 2". These are brand new original HONDA seats that have been hand-shaped and re-formed to reduce the seat height by about 2" There is still 1-1/2" of foam cushion in the main seating area, so normal ADV riding won't be an issue, but if you are a hard-charging off-roader frequently getting airborne, it might be a bit firm on some landings! :-)
These were developed after my wife was about to give up on her Rally as it was too tall for her. She is relatively new to offroad riding and really felt unsafe and uncomfortable on the Rally, especially when riding on sidehills and slippery surfaces where she was not able to touch the ground when needed. We had already installed a lowering link and that helped, but she wanted it lower to feel comfortable. So we gave one of these a try and she now loves her Rally! Easily installed in just a couple of minutes with common hand tools.
We occasionally get further inquiries regarding lowering options and this is our general reply:
The cons of running a link are due to the geometry change in the suspension. In a nutshell, the bike becomes "choppered out" slightly. So the bike likes to go straight (improves straight-line stability), but when cornering on loose surfaces such as gravel roads or lose dirt, the bikes front end will have a bit more of a tendency to plow or push through corners. This is not noticeable on pavement and a beginner off road rider probably won't push the limits of traction enough to have it be an issue, but if you are an experienced off-road rider, you will most likely notice it.
In regards to seat comfort, we had to choose a compromise point that had decent comfort and still an effective seat height reduction. If you read through the reviews, you will see a couple of comments about reduced comfort. I generally tell people that you most likely won't notice it riding off-road where you are standing up intermittently, but if you are riding a couple hundred miles of pavement, then its surely to be noticeable.
Lastly, to simulate the ride height adjustment, find some lumber, bricks or something that you can easily stack up on both sides of the bike that you can rest your feet on that is the same height as the potential drop from the seat and link. That will give you a pretty good sense of how it will feel after the mods.
* These are brand new original HONDA seats that have been hand-shaped and re-formed to reduce the seat height by 2"
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged.
However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Lowering Links by KoubaLink for HONDA CRF 300L & 300L Rally
CRF300L-2
Regular price
$168.00
Save $-168.00
For some reason, the CRF 300L and Rally's have really tall seat heights (over 35" and taller than the AFRICA TWIN!?! ), especially for a small displacement beginners bike. So we have some options to get your feet firmly back on the ground.
Built in Boise, IDAHO. Ridden and raced everywhere.
We are pleased to offer lowering links by KOUBA LINK for the Honda CRF 300L and Rally, which lowers the bike 1-3/4" (44.5mm)
Available in Red or Black colors, make your choice below.
Fits both the standard 2021-2024 CRF 300L and the Rally version.
Also lowers the new 300 LS 1.5"
Please be aware: All lowering link alter the rear shock linkage leverage ratio, effectively making the rear shock spring softer. And it's already too soft for most riders as it's set up for a 100 lb beginner rider. If you ride primarily on the street, it probably won't be that big of a deal, but if you ride off-road on loose surfaces, it will have a tendency to make the bike plow through corners instead of carving corners. The front end will push if that makes sense.
We generally also recommend that when installing a lowering link that the forks be raised as much as possible without touching the bottom of the handlebars. (assuming no bar risers have been installed). We do offer lowering seats that don't alter the handling.
We occasionally get further inquiries regarding lowering options and this is our general reply:
The cons of running a link are due to the geometry change in the suspension. In a nutshell, the bike becomes "choppered out" slightly. So the bike likes to go straight (improves straight-line stability), but when cornering on loose surfaces such as gravel roads or lose dirt, the bikes front end will have a bit more of a tendency to plow or push through corners. This is not noticeable on pavement and a beginner off road rider probably won't push the limits of traction enough to have it be an issue, but if you are an experienced off-road rider, you will most likely notice it.
In regards to seat comfort, we had to choose a compromise point that had decent comfort and still an effective seat height reduction. If you read through the reviews, you will see a couple of comments about reduced comfort. I generally tell people that you most likely won't notice it riding off-road where you are standing up intermittently, but if you are riding a couple hundred miles of pavement, then its surely to be noticeable.
Lastly, to simulate the ride height adjustment, find some lumber, bricks or something that you can easily stack up on both sides of the bike that you can rest your feet on that is the same height as the potential drop from the seat and link. That will give you a pretty good sense of how it will feel after the mods.
* Note: SRC MOTO is located in Oregon which is one of the few US states that does not have any general sales tax, so none is charged. However, please be aware when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
Side stand foot enlarger HONDA CRF 300L & Rally
H-CRF300-14-01-SL
Regular price
$68.00
Save $-68.00
Made specifically for 2021-2024 Honda CRF 300L & Rally
Keeps your side stand from sinking into soft ground & hot pavement!
Don't find out the hard way why these are so popular!
Don't come back to your parked bike to find it on its side after parking on hot pavement or loose soil!
Also available in a 1/2" taller version for bikes running taller suspension settings that can often cause the bike to lean over too far on the stand.
This side stand extension offers a large contact surface (50% larger than stock) to improve the motorcycle’s parking footprint on rough surfaces and soft ground.
Easily installed in just a few minutes with common hand tools.
* Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
NEW Revised version to accommodate US and Global market license plates and license plate lights is shown in the install video above.
Clean up the look of your Honda CRF 300L's back end & license plate holder.
Made of 3mm stainless steel sheet and held securely in place.
Easily installed in just a few minutes with common hand tools.
Available in Satin Black Powder Coat.
Product instructions are available here * Note: SRC MOTO is located in Oregon which is one of the few US states without a general sales tax, so none is charged. However, when shipping outside the USA, import tax, duties, and other local taxes may still be charged by the destination government or municipality.
AFRICA SINGLE Sticker / Decal Set
AS-DECAL
Regular price
$6.95
Save $-6.95
Inspired by the CRF 250l Rally's bigger brother, the mighty Africa Twin.......
4" X 1.5", the perfect size for placement on the front fender, fairing, helmet, toolbox, just about anywhere!
